Siemens SITOP PSU8600 Function Manual page 72

Integrating the library contents
6.1 Working with the library in SIMATIC STEP 7
Step Instruction
number
7 For the parameter "
your SIMATIC STEP 7 project (8183).
8 Save the changes and close the window.
9 Follow the same procedure to call FB300 in OB86 and cyclic interrupt OB. In this example OB33 with the
same instance DB which is created in step 3.
Note
• This Diagnostic block holds only 100 alarms of assigned PSU8600. If there are more than
100 alarms, new alarms will be discarded.
• To know the diagnostic and input address of FB300, refer section Start/diagnostic
(Page 46)address of the connected modules.
72
", enter the PROFINET diagnostic address of the SITOP PSU8600 within
Diag_Address
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Function Manual, 11.2017, A5E37764016-06-76