Fb Sitop_Psu8600_Mu_S_V2 - Siemens SITOP PSU8600 Function Manual

Firmware v1.3 faceplates and communication blocks v2.3 for simatic step 7 v5.5

Hide thumbs Also See for SITOP PSU8600:

Table of Contents

Blocks of the library

5.2 Explanation of SIMATIC STEP 7 blocks

5.2.9

FB SITOP_PSU8600_MU_S_V2

Function principle

This block is used for SITOP PSU8600 with single output only. The block reads the main

module specific data from the global DB for data exchange and outputs the data through its

output parameters.

On request, the block writes the main module specific data first into Cyclic Output Memory

area (if address is provided) and then into the PSU8600 device.

Block diagram

Figure 5-17

SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5

Function Manual, 11.2017, A5E37764016-06-76

Table of Contents