Siemens SITOP PSU8600 Function Manual page 22

Blocks of the library
5.2 Explanation of SIMATIC STEP 7 blocks
Function characteristics
Input parameters
Table 5- 6
Parameter
Module_number
Hw_Ident_Head
Cyclic_IO_Out1_in_addr
Cyclic_IO_Out2_in_addr
Cyclic_IO_Out3_in_addr
Cyclic_IO_Out4_in_addr
Cyclic_IO_Out5_in_addr
Cyclic_IO_Out6_in_addr
Cyclic_IO_Out7_in_addr
Cyclic_IO_Out8_in_addr
Input/output parameters
Table 5- 7
Parameter
Data
22
Data type
Int
WORD
WORD
WORD
WORD
WORD
WORD
WORD
WORD
WORD
Data type
UDT_PSU8600_Data_V2 Data block for global data exchange. DB must
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Description
Number of the expansion module that is
plugged. Starting on the left with "1". (Maxi-
mum of 4 can be plugged)
Start address of the expansion module.
Input address of expansion module output 1.
Input address of expansion module output 2.
Input address of expansion module output 3.
Input address of expansion module output 4.
Input address of expansion module output 5.
Input address of expansion module output 6.
Input address of expansion module output 7.
Input address of expansion module output 8.
Description
follow the UDT structure.
Function Manual, 11.2017, A5E37764016-06-76