Siemens SITOP PSU8600 Function Manual page 54

Blocks of the library
5.3 Explanation of WinCC faceplates
Elements
Table 5- 42
Screen area Parameter
CNX8600[1...4] Operating state and
information <Text field>
Output information Output information 1-4,
5-8
U
I
out
State; (output n)
54
Description
The operating state displays various colors depending on the state of
CNX8600.
The <text field> displays the operating state as plain text.
Text
Manual off
Shutdown after error
Shutdown after error
Startup
Normal operation
Buffer mode
If CNX8600_8X module is connected, you can select outputs 1 to 4 by
clicking on "1-4" button and to select outputs 5 to 8, you can click on
"5-8" button.
[V]; (output n) Displays the output voltage of output n in volt.
out
[A]; (output n) Displays the load current of output n in ampere.
Shows the state of output n. The following states are displayed:
Description
Switched off manually
Ready to start; the power supply can be
switched back on. (example. switched off
remotely or after overload with idle time.)
The output was switched off due to an
error.
Normal operation of the output
SITOP PSU8600 Firmware V1.3: Faceplates and Communication Blocks V2.3 for SIMATIC STEP 7 V5.5
Number
0
1
2
3
4
5
Color
Yellow
Red, flashing
Red
Green
Function Manual, 11.2017, A5E37764016-06-76
Color
White
Red
Red, flashing
White
Green
Yellow