Touchpad Board - HP Stream 11 Maintenance And Service Manual

Touchpad board

NOTE: The touchpad board spare part kit does not include the touchpad board cable. The touchpad board
cable is available as spare part number L44450-001.
Table 5-3 Touchpad board descriptions and part numbers
Description
Touchpad for use in royal blue models
Touchpad for use in diamond white models
Touchpad for use in rose pink models
Before removing the touchpad board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
Remove the touchpad board:
1. Position the keyboard/top cover upside down with the front toward you.
2. Remove the three Phillips M2.0 × 1.6 screws (1) that secure the touchpad bracket to the top cover.
3. Remove the touchpad bracket from the computer (2).
4. Lift the clear protective tape from the touchpad board screws (1).
5. Remove the three Phillips M2.0 × 2.5 screws (2) that secure the touchpad board to the top cover.
26 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Keyboard/top cover on page
Spare part number
L44447-001
L44448-001
L44449-001
22).
22).