Table of Contents
Advertisement
Quick Links
Reference Guide
HP Notebook Series
Document Part Number: 370697-002
April 2005
This guide explains how to set up, operate, maintain, and
troubleshoot your notebook. It also provides information on
battery pack and power management, external device
connections, and modem and network connections. The last
chapter provides additional reference material on modem
commands, safety, and regulatory information.
Advertisement
Table of Contents
Related Manuals for HP 370697-002
Summary of Contents for HP 370697-002
- Page 1 Reference Guide HP Notebook Series Document Part Number: 370697-002 April 2005 This guide explains how to set up, operate, maintain, and troubleshoot your notebook. It also provides information on battery pack and power management, external device connections, and modem and network connections. The last chapter provides additional reference material on modem commands, safety, and regulatory information.
- Page 2 Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
-
Page 3: Table Of Contents
1 Getting Started with Your Notebook Identifying Parts of the Notebook ....1–1 Front Panel and Right Panel Components ..1–2 Left Panel and Back Panel Components . - Page 4 Contents Using CDs or DVDs......2–10 To Insert or Remove a CD or DVD... . . 2–10 To Play DVD Movies .
- Page 5 4 Modem and Network Connections Using the Modem....... 4–1 To Connect the Modem ..... . . 4–2 Special Restrictions in Certain Countries .
- Page 6 Contents Display Problems......6–4 Hard Drive Problems ......6–5 Heat Problems .
-
Page 7: Getting Started With Your Notebook
Identifying Parts of the Notebook Components included with the notebook may vary by geographical region and the features you selected. The following tables identify the standard external components included with most notebook models. Find the illustrations that closely match your notebook to identify your components. -
Page 8: Front Panel And Right Panel Components
Getting Started with Your Notebook Front Panel and Right Panel Components Main status lights (left to right): power mode, hard drive activity, and battery TouchPad, scroll pad, Click buttons, and an on-off button Power button: turns the notebook on and off Keyboard status lights One-Touch buttons Notebook open/close latch... -
Page 9: Left Panel And Back Panel Components
Left Panel and Back Panel Components AC adapter jack Universal serial bus (USB) ports RJ-45 jack: connects a network cable S-Video out jack (select models only) Parallel port (LPT1): use this port for a parallel printer or other parallel device (select models only) Serial port (COM1): use this port for a serial mouse, modem, printer, or other serial device... -
Page 10: Bottom Panel Components
Getting Started with Your Notebook Bottom Panel Components Hard drive Battery latch RAM (memory) cover Ä CAUTION: To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devices in your country. -
Page 11: Status Lights
Status Lights The notebook includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as Caps Lock and Num Lock. The following diagram shows the main status lights on the front of the notebook. Power mode On—notebook is on (even if the display is off) Blinking—notebook is in Standby... - Page 12 Getting Started with Your Notebook The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. Caps Lock On: Caps Lock is active. Num Lock On: Num Lock is active. (The Keypad Lock must also be on to use the embedded keypad.) Keypad Lock On: The embedded keypad is active (Fn+F8).
-
Page 13: Setting Up Your Notebook
This guide is located on the Web at http://www.hp.com/ergo Documentation CD that is included with the product. When you set up your notebook for the first time, you will connect the AC adapter, charge the battery pack, turn on the notebook, and run the Microsoft®... -
Page 14: Step 2: Connect Ac Power
Getting Started with Your Notebook Step 2: Connect AC Power Ä CAUTION: Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Using the wrong AC adapter could damage the notebook or adapter, cause data loss, and may void your warranty. -
Page 15: Step 3: Connect A Phone Line
Step 3: Connect a Phone Line 1. Make sure the telephone line is an analog line, sometimes called a data line. (Do not use a digital line.) 2. Connect the telephone cord (RJ-11) into a telephone jack. 3. Plug the other end of the telephone cord into the RJ-11 modem jack on the notebook. -
Page 16: Step 4: Turn On The Notebook
Getting Started with Your Notebook Step 4: Turn On the Notebook Press the power button above the left side of the keyboard. The notebook boots up, and Windows starts automatically. If your notebook does not turn on when operating on battery power, the battery pack may be out of power. -
Page 17: Step 5: Set Up Windows
Step 5: Set Up Windows Your notebook has the Microsoft Windows operating system preinstalled on its hard drive. The first time you turn on your notebook, the Windows Setup program runs automatically and includes opportunities to customize your setup. 1. Follow the Setup program instructions on the screen. If the program prompts you to enter the Product ID code, locate the code on the bottom of the notebook. -
Page 18: Basic Operation
You can start and stop your notebook by using the power button. At other times, power considerations, types of active connections, and startup time may cause you to use alternative methods to start or stop your notebook. This chapter describes several methods. HP Manual Title 2–1... -
Page 19: Default Power Settings
Saves significant power. Turns off the display and other components. Maintains current session in RAM. Restarts quickly. Restores network connections. Saves maximum power. Saves current session to disk, then shuts down. Restores network connections. chapter in this guide. HP Manual Title... -
Page 20: To Reset The Notebook
If you want to boot from a specific device whenever it is present, change the boot order using the BIOS Setup utility. See “Configuring Your Notebook” in this guide. HP Manual Title Basic Operation ctrl+alt+del, to display the in the “Troubleshooting”... -
Page 21: To Use The Touchpad
Click buttons. The Click buttons work like the left and right buttons on a standard mouse TouchPad (touch-sensitive pointing device). TouchPad on-off button and indicator light. Scroll pad. The scroll pad scrolls vertically to display the contents of the active window. 2–4 HP Manual Title... -
Page 22: To Use The Tap To Click Function Of The Touchpad
Mouse. The Mouse Properties dialog box opens. 2. Select the Tapping tab. 3. In the left panel, clear the Tapping check box. 4. Select Apply > OK. The Tap to Click function is now disabled. HP Manual Title Basic Operation 2–5... -
Page 23: To Use The Function Hot Keys
(as marked on an external keyboard). Initiates Hibernation. Toggles Scroll Lock on and off. Increases the audio volume and cancels the mute setting. Decreases the audio volume. Mutes/unmutes the audio output. HP Manual Title... -
Page 24: To Use The One-Touch Buttons
Web site you want the button to open. 4. If you want a label to appear onscreen when you press a One-Touch button, select that option on the Onscreen Display tab. HP Manual Title Basic Operation 2–7... -
Page 25: To Use The Windows And Applications Keys
Windows key+F Windows key+M Shift+Windows key+M Windows key+R 2–8 Does this Runs Windows Explorer Runs Windows Help Runs Windows Find: Search Minimizes all displayed windows Returns all minimized windows to original size Runs the Windows Run dialog box HP Manual Title... -
Page 26: To Type Alternate Graphics Using The Alt Gr Key
If your keyboard does not have an ALT GR key, you can use the ALT key instead of the ALT GR key to get the same result. HP Manual Title key to the right of the ALT GR... -
Page 27: Using Cds Or Dvds
3. Slide the tray back into the module to close it. If your notebook loses power, you can manually open the drive to remove a CD. Insert a straightened paper clip into the recessed hole on the front of the drive to open it. 2–10 HP Manual Title... -
Page 28: To Play Dvd Movies
DVD drive and will be permanent. Your warranty does not cover the expense of correcting this situation. Refer to the Help for your DVD player software for details about setting region codes. HP Manual Title Basic Operation 2–11... -
Page 29: To Write To Dvd Media (Select Models Only)
If your notebook is equipped with a DVD/CD-RW Combo drive, it also includes CD software that lets you copy or create CDs. Follow the instructions that are included with the software. Read and write quality may vary by media. 2–12 HP Manual Title... -
Page 30: Securing Your Notebook
If a One-Touch button is assigned to Quick Lock, press that button. -or- Press ctrl+alt+del, To unlock the notebook, follow your normal logon steps. HP Manual Title in the “Troubleshooting” then select Lock Computer. Basic Operation “Configuring chapter. For complete... -
Page 31: To Attach An Optional Security Cable
Because new viruses appear frequently, you will also want to keep the program virus definitions up to date. Norton AntiVirus updates are on the Web at get detailed instructions from the program’s online Help. 2–14 http://www.symantec.com. You can also HP Manual Title... -
Page 32: To Lock The Hard Drive
Avoid bumps or jolts. Do not operate the notebook while traveling over bumpy terrain. HP Manual Title to save and exit BIOS Setup. Basic Operation to enter the BIOS 2–15... -
Page 33: To Maintain Your Notebook
DVDs, and other media, or network drives. Use a virus-scanning program (such as the Norton AntiVirus program included with your notebook) to check your files and operating system. Check your disk using the Tools tab in the disk Properties window. 2–16 chapter. HP Manual Title... -
Page 34: To Extend The Life Of The Display
Do not use abrasive cleaners, especially on the display. Do not apply any cleaner directly to the display. Instead, apply the cleaner to a soft cloth, then gently wipe the display. HP Manual Title Basic Operation 2–17... -
Page 35: Battery Packs And Power Management
Battery Packs and Power Managing Power Consumption When you are running your notebook on battery power, you can maximize operating time without compromising performance. Your notebook is designed to help you reduce power consumption and extend battery life. During idle periods, the notebook automatically enters power-saving modes after specified timeout periods. -
Page 36: How The Notebook Manages Power Automatically
Battery Packs and Power Management How the Notebook Manages Power Automatically Your notebook enters Hibernation and Standby automatically, and turns off the hard drive and display based on values set in Windows. When this occurs No keyboard, pointing device, or other input activity occurs for the specified interval The hard drive is not... -
Page 37: To Change Timeout Settings And Create Power Schemes
To Change Timeout Settings and Create Power Schemes You can adjust the length of timeouts after which your notebook automatically shuts down components or enters a power-saving mode. You can also save these settings as a power scheme. 1. Select Start > Control Panel > Performance and Maintenance >... -
Page 38: To Respond To A Low-Battery Warning
Battery Packs and Power Management From the Windows Control Panel » Select Start > Control Panel > Performance and Maintenance > Power Options, then select the Power Meter tab to see the battery status. The Alarms and Advanced tabs provide additional power information options. On the battery pack 1. -
Page 39: To Recharge The Battery Pack
To Recharge the Battery Pack Ä CAUTION: The AC adapter is normally warm when plugged into an AC outlet. The notebook is normally warm while recharging. Do not recharge the notebook in a briefcase or other confined space, or the battery pack could overheat. - Page 40 Battery Packs and Power Management If your notebook has a wireless on-off button, turn off the wireless function when you are not using it. Press the wireless on-off button to turn off the light. If you have a PC Card, such as a network card, remove it when you are not using it.
-
Page 41: Disposing Of A Used Battery Pack
In Europe, dispose of or recycle battery packs by using the public collection system or by returning them to HP, your service partner, or their agents. In other regions, refer to the Worldwide Telephone Numbers booklet, included with the notebook, to contact HP and request information about battery pack disposal. -
Page 42: Modem And Network Connections
Using the Modem You can connect your modem to a telephone line and communicate throughout the world. You can explore the Internet, send and receive e-mail messages, and use your notebook to send and receive faxes. Your notebook contains several software programs that work with your modem: Internet Explorer, for browsing the World Wide Web Outlook Express, for sending and receiving e-mail messages... -
Page 43: To Connect The Modem
Modem and Network Connections To Connect the Modem Ä CAUTION: Your built-in modem may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and does not work with party lines. Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem. -
Page 44: Special Restrictions In Certain Countries
Special Restrictions in Certain Countries Many countries impose a blackout period after a modem repeatedly fails to connect to a service provider. The number of failed attempts and the period you must wait before trying again differ from country to country. Check with your telephone company. -
Page 45: To Change Your Modem Settings
Modem and Network Connections To Change Your Modem Settings The modem is already set up to be compatible with telephone systems and modems in most areas. However, in some situations, you may have to change modem settings to match local conditions. -
Page 46: Connecting To A Local Area Network (Lan)
Connecting to a Local Area Network (LAN) You can connect to local area networks (LANs). LANs give you access to network resources, such as printers and file servers on your corporate network, and possibly to the Internet. To connect to a LAN: 1. -
Page 47: Making Wireless Network Connections
Modem and Network Connections Making Wireless Network Connections (Select Models Only) If your notebook includes a wireless on-off button, you can connect by radio to an 802.11 wireless local area network (WLAN) and access computers and other resources on the network. -
Page 48: To Turn Wireless Communication On And Off
To Turn Wireless Communication On and Off For instructions to enable WLAN communications, refer to the Go Wireless booklet included with your notebook (select models only). Wireless networks and cellular modems are examples of devices that use wireless communication. Such devices may be restricted in some situations or environments, such as when traveling in an airplane. - Page 49 Modem and Network Connections Turning Off Communication and Ending a Connection 1. Close any files that reside on other network notebooks. 2. To turn off the wireless 802.11 communication without turning off the notebook, press the wireless on-off button. -or- Right-click the wireless network connection icon in the taskbar, then select Disable.
-
Page 50: Add-On Devices
Connecting External Devices To Insert or Remove a PC Card The notebook PC Card slot supports standard Type II and Type III PC Cards (PCMCIA and CardBus). The location and number of the PC Card slots vary by model series. Inserting a PC Card 1. -
Page 51: Removing A Pc Card
Add-On Devices Removing a PC Card Ä CAUTION: Before removing a PC Card, you must use the Eject Hardware or Safely Remove Hardware icon in the taskbar, or shut down the notebook. Otherwise, you could lose data. 1. Select the Eject Hardware or Safely Remove Hardware icon in the taskbar, select the card you want to remove, then remove the card. -
Page 52: To Connect An Audio Device
To Connect an Audio Device You can plug in an external microphone, external speakers, or headphones. Ä CAUTION: The headphone and line-in jacks are three-terminal stereo jacks. They are not compatible with two-terminal mono plugs. Connecting a mono plug into either of these jacks may damage the notebook. -
Page 53: To Connect A Tv To Your Notebook (Select Models Only)
Add-On Devices To Connect a TV to Your Notebook (Select Models Only) 1. Plug a standard 4-pin S-Video cable to the optional S-Video out jack on your notebook (yellow connector on the back panel). Plug the other end of the cable to the S-Video in jack on your television. -
Page 54: Switching The Display To The External Monitor (Select Models Only)
Switching the Display to the External Monitor (Select Models Only) Press the TV Now! One-Touch button which is identified with a TV icon, at the top of your keyboard to switch the display to the TV-Out mode. If a TV is not connected to the notebook, your default media application will launch. - Page 55 Add-On Devices Using Dual Display Mode You can extend your desktop by connecting an external monitor to your notebook. 1. Select Start > Control Panel > Appearance and Themes > Display. 2. Select the Settings tab. 3. Select the second display, then select the option to extend the desktop.
-
Page 56: To Connect A 1394 Device (Select Models Only)
To Connect a 1394 Device (Select Models Only) If your notebook has a 1394 port (also known as firewire), you can use it to connect devices such as audio and video equipment, disk drives, printers, and other notebooks. Attach the device cable to the 1394 port. Windows automatically recognizes the device. -
Page 57: Using The Infrared Port
Add-On Devices Using the Infrared Port Make sure the infrared port of your notebook and the infrared port of the device with which you want to communicate are positioned in a straight line facing each other. The 2 ports should be no more than 3.3 feet (1 meter) apart with no obstructions in between. -
Page 58: Installing Additional Ram (Memory)
Installing Additional RAM (Memory) The notebook has 2 slots that hold 2 RAM modules. At least 1 slot contains a RAM module installed at the factory. You can use both slots to expand your RAM. To Install a RAM Expansion Module Use only PC2100 DDR-266 MHz or higher RAM. -
Page 59: To Remove A Ram Expansion Module
Add-On Devices 4. Insert the RAM board into the connector at about a 30-degree angle until it is fully inserted. Then press down at both sides until both latches snap closed. 5. Replace the cover. 6. Insert the battery pack. To Remove a RAM Expansion Module You may want to remove a RAM module so you can install a larger one. - Page 60 4. Release the 2 latches at the sides of the RAM board, so the free edge of the board pops up. Match your notebook to the following illustration. 5. Pull the board out of the connector. 6. Replace the cover. 7.
-
Page 61: Replacing The Hard Drive
Add-On Devices Replacing the Hard Drive To Replace the Hard Drive You will need a small Phillips screwdriver for this procedure. 1. Unplug the AC adapter, if connected. 2. Remove the battery pack. 3. Turn the unit bottom side up. 4. -
Page 62: To Replace The Hard Drive Holder
To Replace the Hard Drive Holder If you are installing a new hard drive that does not have a holder, you can remove the holder parts from the hard drive you are removing. You will need a small Phillips screwdriver for this procedure. -
Page 63: To Prepare A New Hard Drive
Add-On Devices To Prepare a New Hard Drive When you install a new hard drive, you also need to prepare it to be able to work with your notebook. If you want to restore the Windows software and operating system that were originally installed on your notebook, follow the system recovery procedures described in the chapter of this guide. -
Page 64: Troubleshooting
Troubleshooting Your Notebook This chapter contains solutions to many types of problems you might have with your notebook. Try the solutions one at a time, in the order in which they are presented. Here are some other sources of information for troubleshooting: Use the Windows troubleshooters. -
Page 65: Audio Problems
Troubleshooting Audio Problems If No Sound is Audible If your model has a volume control, press the + (plus) button to increase the volume. Select the speaker icon on the taskbar (if present). Clear the Mute all check box if selected. If your model has an audio mute button, press it so the indicator light goes off. -
Page 66: Cd-Rom And Dvd Problems
CD-ROM and DVD Problems If You Cannot Boot from a CD or DVD Make sure the CD or DVD is bootable. Make sure the CD-ROM/DVD drive is selected as the boot device. See the change the boot sequence. Restart the notebook. Select Start > Turn Off Computer > Restart. -
Page 67: Display Problems
Troubleshooting Restart the system: remove the disc from the drive, and select Start > Turn Off Computer > Restart. If you created the CD on a DVD/CD-RW combo-type drive, try using a different media brand. Read and write quality may vary for media. -
Page 68: Hard Drive Problems
If the Screen Is Difficult to Read Try setting the display resolution to its default setting of 1024 × 768 or higher, depending on your model. Select Start > Control Panel > Appearance and Themes > Display. Try adjusting the size of the desktop icons and labels. If an External Display Does Not Work Check the connections. -
Page 69: Heat Problems
Troubleshooting If Files Are Corrupted Open My Computer, and the disk you want to scan. Select File > Properties. Select the Check Now box under the Error-checking section of the Tools tab. Run the virus-scanning program. If necessary, you can format the hard disk and reinstall the original factory software using the system recovery features described in the Heat Problems... -
Page 70: Infrared Problems
Infrared Problems By default, the optional infrared port is enabled, so you must enable it before you can use it. If You Have Problems with Infrared Communications Make sure the line of sight between the 2 infrared ports is not blocked, and that the ports face each other as squarely as possible. -
Page 71: Local Area Network (Lan) Problems
Troubleshooting If the TouchPad Does Not Work Press the TouchPad on-off button to turn on the light. Do not touch the TouchPad while the notebook is rebooting or resuming from Standby mode. If this happens, try the following: press a key on the keyboard to restore normal operation. -
Page 72: Memory Problems
If You Cannot Browse the Network Neighborhood or My Network Places Select Start > Search > Notebooks or People to look for a notebook. If You Cannot Log In to Netware Servers If a Netware server is using IPX/SPX protocol, you may need to force your frame type to match the server frame type. -
Page 73: Modem Problems
Troubleshooting If the Notebook Beeps But Does Not Start After Adding RAM You installed an incompatible type of RAM. Remove the module. Modem Problems If the Modem Seems Slow Excess static or noise on a line reduces the overall transmission speed of the modem connection. If necessary, contact your telephone company about fixing this type of problem. - Page 74 Try another telephone line, preferably one normally used for a fax machine or modem. If you are in a foreign country, the dial tone may not be recognized by the modem. In Control Panel, open Phone and Modem Options. Try disabling the option that waits for a dial tone.
- Page 75 Troubleshooting If the Modem Is Not Detected Check the modem setup. In Control Panel, open Phone and Modem Options. Check the COM port. Open the hardware Device Manager. Select Start > Control Panel > Performance and Maintenance > System. If the modem is disabled, try to enable it.
-
Page 76: Pc Card (Pcmcia) Problems
If the Modem Does Not Fax If you are using fax Class 2 in the fax software, try using Class 1. Close any other communications programs. If you are faxing by printing from an application, make sure you have selected the fax printer. Try turning off power management features temporarily. -
Page 77: Performance Problems
Troubleshooting Zoomed Video is not supported. If the card requires an IRQ, make sure one is available. Open the hardware Device Manager. Select Start > Control Panel > Performance and Maintenance > System. If a Network PC Card Stops Communicating Properly The card may have been reset if the notebook entered Standby or shut off. -
Page 78: Power And Battery Pack Problems
Some file browsers respond slowly while processing graphics or waiting for broken network connections to time out. If the notebook hard drive frequently runs (as indicated by the hard drive light on the front of the notebook) while the notebook appears to be paused or running slowly, Windows is likely spending excess time writing to its swap file on the notebook hard disk. - Page 79 Troubleshooting If the Notebook Keeps Beeping The notebook beeps repeatedly or displays a warning when battery power is low. Save your work, shut down Windows immediately, and insert a charged battery pack or plug in the AC adapter. If the Battery Pack Does Not Charge Make sure the AC adapter is fully plugged into the power source and the notebook, and that the battery charging light on the notebook is on.
- Page 80 If the operating time has gradually become shorter and the battery pack is more than a year or two old, you may need to replace the battery pack. Heavy modem use can impact battery-operating time. PC Card use can impact battery-operating time. Test and recondition the battery pack every 3 months.
-
Page 81: Printing Problems
Troubleshooting Printing Problems You will usually be able to solve most printing problems by using the Print troubleshooter in Windows Help. Select Start > Help and Support. If a Serial or Parallel Printer Does Not Print Make sure the printer is on and has paper in it. Make sure you are using the correct printer cable or cable adapter, and that the cable is secure at both ends. -
Page 82: Serial, Parallel And Usb Problems
Serial, Parallel and USB Problems If a Serial Mouse Does Not Work Make sure you followed the manufacturer’s installation instructions completely and have installed the mouse properly. If not, repeat the procedure. Make sure the port connection is secure. Restart the notebook. Select Start > Turn Off Computer > Restart. -
Page 83: Startup Problems
Troubleshooting If the Serial or Parallel Port Is Not Working Make sure the port connection is secure. Check the port settings in Control Panel. Open the hardware Device Manager, then select Ports (COM & LPT). If the USB Port Is Not Working Contact the vendor of the peripheral device for the latest USB drivers. - Page 84 If the Notebook Will Not Boot from the Diskette Drive Make sure the diskette drive is selected as the boot device. See the If you are using a USB diskette drive, use the BIOS Setup utility to make sure Legacy USB Support is enabled. If your notebook also has a built-in diskette drive, use the BIOS Setup utility Boot menu to make sure the USB diskette drive is the first device under Removable Drive.
-
Page 85: Wireless Problems
Troubleshooting Wireless Problems If You Have Problems with Wireless 802.11 Communication Make sure the wireless indicator light is on. Make sure you are using the correct SSID and channel settings. Make sure you are in range of an access point (for an infrastructure connection) or other wireless notebook (for an Ad Hoc connection). -
Page 86: The Network
If You Cannot Connect to a Particular Notebook on the Network Make sure the notebook is properly connected to the network. Make sure your TCP/IP setup is correct for your network. Select Start > Control Panel > Network Connections. If You Can Connect, But the Network Is Slow Check whether you might be in an area served by more than one wireless LAN. -
Page 87: Configuring Your Notebook
Troubleshooting Configuring Your Notebook The BIOS Setup utility helps you configure your notebook operation. To Run the BIOS Setup Utility The BIOS (basic input and output system) Setup utility enables you to make changes to the notebook system configuration, and to tailor the operation of your notebook to your individual work needs. -
Page 88: Main Menu
Main Menu Setting BIOS Revision System Time System Date Language Internal Hard Disk UMA Video Memory Memory Serial Number Service ID UUID MAC Address Reference Guide Description Shows the current BIOS version. Sets the time using 24-hour format. Values set take effect immediately. -
Page 89: System Devices Menu
Troubleshooting System Devices Menu Setting Video Display Device External Pointing Device Legacy USB Support Wake On LAN from Power Off Security Menu Setting User Password is Administrator Password is Set User Password 6–26 Description Sets whether the built-in display automatically switches to an external display, if one is detected. - Page 90 Security Menu (Continued) Setting Administrator Password Require Password on Boot Internal hard drive lock Reference Guide Description Press enter to set, change, or clear the administrator password, which protects BIOS Setup settings. The password can have no more than 8 characters (0–9, A–Z), and cannot include special or accented characters.
-
Page 91: Boot Menu
Troubleshooting Boot Menu Setting Hard Drive +Removable Devices CD-ROM Drive Built-in LAN Exit Menu Setting Save Changes and Exit Discard Changes and Exit Get Default Values 6–28 Description Shows the order of boot devices. Move the entries to change the order. If the notebook has more than 1 device in a + category, you can select the one scanned. -
Page 92: Updating Software And Drivers From The Web
Web Software and driver updates for your notebook are available for download. For more information, visit the Web site at http://www.hp.com/support. Using System Recovery Features The notebook system recovery process provides several options for recovering optimal system functionality. System Restore and OS CDs (operating system CDs) enable you to recover or repair your notebook without losing personal data. -
Page 93: Safeguarding Your Data
Troubleshooting Safeguarding Your Data Software or devices added to the notebook can cause your system to become unstable. To safeguard your documents, store personal files in the My Documents folder and periodically create a backup copy of My Documents. Setting System Restore points is also recommended. -
Page 94: Operating System (Os) Cd Repair
Operating System (OS) CD Repair To repair the operating system without deleting your personal data, use the standard Microsoft OS CD that was shipped with the notebook. This CD contains the following preinstalled operating systems: Microsoft Windows XP Home or Pro (depending on configuration) Appropriate service pack To repair the operating system:... -
Page 95: Os Cd Reinstall
Troubleshooting OS CD Reinstall If other recovery efforts do not successfully repair the notebook, you can reinstall the operating system. Å WARNING: Personal data and software you have installed on the notebook will be lost during the OS CD reinstall. To protect your data, make a backup copy of My Documents before reinstalling your operating system. -
Page 96: Reinstalling Drivers
11. Select Format the partition using the NTFS file system (Quick) and press this drive will delete all current files. 12. Press to format the drive. The reinstallation process begins. This process takes 1 to 2 hours to complete. The notebook restarts in Windows after the process is complete. - Page 97 1394 port connecting 5–7 location 1–3 AC adapter connecting 1–8 jack location 1–3 adjusting brightness 2–6 monitor resolution 5–5 volume 2–6 ALT GR key 2–9 alternate graphics (ALT GR) 2–9 antivirus software 2–14 AT commands 4–4 audio adjusting volume 2–6 device connection 5–3 jack location 1–3 mute button 1–3...
- Page 98 Index power 1–2 1–10 reset 1–4 TV Now! One-Touch 5–5 wireless on-off 1–2 cable lock slot 1–3 CardBus slot location 1–3 CD-ROM drive copying/creating CDs 2–12 inserting CD 2–10 location 1–2 removing CD 2–10 troubleshooting 6–3 changing the boot device 2–3 cleaning the notebook 2–17 Click buttons 1–2 components...
- Page 99 Fn keys 2–6 front panel components 1–2 function hot keys 2–6 hard drive activity status light 1–5 holder replacement 5–13 location 1–2 1–4 locking 2–15 preparing a new drive 5–14 protecting 2–15 replacing 5–12 troubleshooting 6–5 Hibernation mode 2–2 holder, hard drive 5–13 hot keys 2–6 identifying components 1–1 increasing display brightness 2–6...
- Page 100 Index open/close latch 1–2 Operating System CD reinstall 6–32 repair 6–31 parallel connection, troubleshooting 6–20 parallel port (LPT1) 1–3 parts of the notebook back panel 1–3 bottom panel 1–4 front panel 1–2 left panel 1–3 right panel 1–2 status lights 1–5 password protection 2–13 PC Cards installing 5–1...
- Page 101 safeguarding data 2–16 saving power 3–3 scroll pad, location 1–2 security locking the hard drive 2–15 locking your notebook 2–13 protecting data 2–16 setting up a password 2–13 virus-protection software 2–14 serial port (COM1) location 1–3 troubleshooting 6–19 setting up the notebook connect phone line 1–9 connect power 1–8 install battery pack 1–7...
- Page 102 Index turning off notebook 2–2 wireless network connection 4–8 turning on notebook 1–10 2–2 wireless network connection 4–7 TV Now! One-Touch button 5–5 updating software 6–29 USB ports location 1–3 troubleshooting 6–20 using BIOS Setup Utility 6–24 virus-protection software 2–14 volume control 1–3 wireless indicator light 1–2...