Page 1
36" x 22" Manual Height Adjustable Standing Desk Instruction Manual SKU: DESK-V111VM Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v111vm help@vivo-us.com www.vivo-us.com 1-800-371-5654...
WARNING! ASSEMBLY STEPS If you do not understand these directions, or if you have any doubts about the safety of the STEP 1 installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product Screw the foot pads (C) into the underside of the base (10).
Page 3
STEP 4 STEP 6 Install the desk support brackets (2) to the front and back of the leg (8) using x6 M6x16 bolts (A), and Install the desktop (1) to the top of the frame using x6 M5x14 bolts (D). Then, install keyboard support tighten with the Allen wrench (F).
Page 4
Step 8 CAUTION! Mount the keyboard shelf (7) to the support brackets (5) using the knobs pre-installed on the brackets. Step 9 Loosen the nut on the handle shaft and slide handle out past the desktop. This will allow you to easily rotate the crank (4) to raise or lower the desktop.
Page 5
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the DESK-V111VM and is the answer not in the manual?
Questions and answers