Webasto TurboCord User Manual page 17

Problem
RED TROUBLE
Indicator is blinking
rapidly
RED TROUBLE
Indicator is on solid
when connected to
vehicle
RED TROUBLE
Indicator is off
and BLUE STATUS
Indicator is on when
you unplug from
vehicle
RED TROUBLE
Indicator is on solid
NOT connected to
vehicle
RED TROUBLE
Indicator and BLUE
STATUS Indicator are
both on
These commodities, technology or software were exported from the United States in accordance
with the Export Administration Regulations. Diversion contrary to US law is prohibited.
Possible Cause
Utility fault
Above temperature
limit
Cases:
Temperature is
•
too high. The
charger will
restart charging
when it cools
down.
House/socket
•
wiring may be
faulty.
Vehicle problem
Charger internal
failure
Charger trying to
resolve internal
error
Solution
1. Disconnect the charger module from
the wall outlet, then reconnect to the
wall outlet.
2. If the condition persists, have a
qualified electrician inspect the wall
outlet ground circuit integrity.
3. Repair as required.
Inspect charger module for overheating
1.
(hot to the touch).
Carefully unplug charger module from
2.
the wall outlet and allow to cool.
If the condition persists, contact
3.
Customer Support for assistance.
Disconnect the charger (and adapter, if
4.
operating in 240 VAC mode) from the
wall outlet.
Have a qualified electrician inspect the
5.
wall outlet and adapter integrity.
Repair as required.
6.
Contact your vehicle service department.
Contact Customer Support for assistance.
Charger will return to normal operation
within 1 minute. If problem persists,
contact Customer Support for assistance.
13