Installation Methods - Eaton XanuraHome RFIX35 Manual

Installation methods

• The RFIX35 is designed to be:
- installed on a standard 50 mm junction box or
- installed below a (ceiling) distribution box, or
- mounted on a wall (using supplied power cable).
• When installing in a meter box, you must ensure that the plug
of the RFIX35 is inserted in a socket that is electrically "after"
the filter.
Note: Automatic switching does not just increase
!
the level of comfort, a number of hazards are also
involved. People may be surprised, or clothing pla-
ced over an electrical heat source may ignite.
Always be aware of these hazards and take the
necessary precautions.
• The product must only be opened for installation purposes.
We advise you to have the product installed by a trained and
certified XanuraHome dealer.
MBO 6012349G01 001 53