Raven CR Series Operation Manual page 43

FIGURE 21. AB Guidance Line Recording
4. When done recording, press the next point (in this case it will be B).
5. Select Accept
6. Select the guidance line icon along the right side of the screen.
7. Select the Edit
will open.
8. Enter a name for the guidance line.
9. Press Accept
10. When in a job, select Load
to complete the line.
next to the newly created line. The Edit Guidance Line window
. If desired, select Delete
to load and use an existing guidance line.
to delete the guidance line.
Starting
Point
End Point
Flashing
Light
41