Raven CR Series Operation Manual page 16

Software Update
USB Scanning
USB Transfer
Outdoor Sensor
FOOTER TOOLS
The buttons at the bottom of the screen provide easy access to settings and features
such as the UT, any active alarms or notifications, and also different views for use
during an in-field operation. Review the following descriptions of the function of the
icons displayed in the footer.
TABLE 2. CRX Footer Tools
Icon
Toggle View
Alarms
Confirm
Cancel
Screen Capture
Create Job in a
New Field
Settings Menu
UT
14
A CRX software update is available. Refer to
"Software and Hardware Updates" on page 59
for additional information on performing a
CRX software update.
Indicates that CRX is scanning the connected
USB drive. Refer to "Software and Hardware
Updates" on page 59 for additional
information on updates.
CRX is transferring files from the connected
USB drive.
Outdoor Sensor is communicating.
Name
Toggle between the 3D and aerial view during
in-field operations.
Display information about active alerts or
review notification history.
Select confirm to either accept the change or
exit the job.
Select Cancel to stop performing the current
selection.
Press this to capture a screen shot of the
current screen.
Select this icon to start a new job in a new
field.
Open the Settings Menu.
Select UT to open and control components on
the ISOBUS.
Description