Common Specifications - MTS Systems Exceed 40 Series Product Manual

Common Specifications

Accuracy Grade
Force range
Rated force capacity at max test speed
Maximum test speed at rated force
capacity
Force indicating accuracy
Speed accuracy
Position accuracy
Measurement range of strain
Strain measurement accuraty
Security protection
Over force protection
Data acquisition rate
Control loop rate
Environmental requirements
Operating temperature
Operating humidity
Storage temperature
Maximum storage humidity
Maximum altitude
Motor and drive system
Ball screws
Position measurement
Additional DC conditioning channels
Additional incremental encoder
conditioning channels
MTS Exceed™ Series 40 Product Manual
The following specifications are for all MTS Exceed frames. Specifications for
the specific models are located in the following tables.
Class 0.5 / Class 1
0.4-100% of rated force capacity / 0.2-100% of rated force
capacity
100%
100%
± 0.5 % of indicating / ±1% of indicating
Set speed < 0.01 mm/min: speed accuracy is within ± 1.0% of set
speed
Set speed ≥ 0.01 mm/min: speed accuracy is within ± 0.2% of set
speed
Within ± 0.5%
0.2 ~ 100% FS
Class 0.5 / Class 1
Over-Force, travel limits, over-voltage and others
10%
1000 Hz
1000 Hz
For indoor use only
5-40°C (41-104°F)
5-85% Noncondensing
-18-49°C (0-120°F)
90% Noncondensing
2000 m (6562 ft)
AC Servomotor
Preloaded
Encoder
2 channels
2 channel
Specifications
Introduction 31