Volt Electronic Ignition System Connection Diagrams - Warming Trends CFB60 NG Owner's Manual And Instruction Manual

24 VOLT ELECTRONIC IGNITION SYSTEM
CONNECTION DIAGRAMS
250K - 290K BTU Systems
250K - 299K with DFLKVFIT250 (Follow steps 1 - 8)
300K+ with DFLKVFIT300 (Follow steps 1 - 8, including 3A)
1. Locate DFLKV34 and FIT250 OR DFLKV34 and FIT300
Parts include two Whistle-Free Flex Lines, key valve,
escutcheon plate, keys, and FIT250 Kit (DFLKV34FIT250
ONLY) or FIT300 Kit (DFLKVFIT300 ONLY)
3" Key
FIT250 Kit: (1) 3/4" x 3" Nipple,
(1) 3/4" x ½" MM Reducer Fitting,
(2) 3/4" Tees
Included with DFLKV34FIT250 ONLY
2. Remove Flared Fittings from Whistle-Free Flex Lines
(DFLKV34FIT250 and DFLKV34FIT300) Removing flared
fittings first makes attaching to FIT250 or FIT300 easier.
Thread
sealant is
applied
to this
end only
throughout
instructions Flared Fitting
3. Connect to Coupling
(DFLKV34FIT250) Connect ½" x 3/4" Reducing Fitting
to Gas Valve
Coupling
Drip 24 Volt Ignition
Leg
16
12" Key
Escutcheon
STEP 1- FIT250
FIT300 Kit: (2) 3/4" x 3" Nipple,
(2) 3/4" Tees
Included with DFLKV34FIT300 ONLY
Flared End
Plate
FIT250 (½" x 3/4"
Reducing Fitting)
Apply thread
sealant here
www.Warming-Trends.com | 303 346 2224 | orders@warming-trends.com
Key Valve
3A. Connect to Coupling
(DFLKV34FIT300) Connect 3/4" x 3" Nipple to
Gas Valve
Coupling
Drip 24 Volt Ignition
Leg
Whistle-Free Flex Lines
Flared
Fitting
Whistle-Free Flex Line
Plate
FIT300 (3/4" x 3" Nipple)
Apply thread
sealant here