Vankyo Leisure 3 User Manual page 31

www.ivankyo.com 2018-2019 VanTop, Inc. All rights reserved.
6. How Can I Do if the Projection Screen is Not Square or Allied Horizontally
*Make sure the projector is placed on a flat surface with projector light in the middle of the screen.
*Make sure the projector screen is placed horizontally.
7. How Can I Do if There is Color Distortion?
*Make sure the video source has a fine resolution.
*Adjust the colors: enter Menu-Picture-Color Temperature, then select different modes and adjust the value accordingly.
*Reset the projector to manufacturer setting: enter Menu-Option-Restore Factory Default to reset.
8. How Can I Do if the Remote is Unresponsive?
*Make sure the batteries are installed correctly and the power is enough.
*The remote works with the projector through the IR receiver. The remote works only when the IR receiver is within the direct reaction distance and will be unresponsive if the IR receiver
is blocked or covered.
9. How Should I do if There are Small Dots on Display?
*Tap the projector slightly to shake off the dust which may be caused during installing or shipping
*Clean the lens with clean non-woven fabrics
10. How Should I Do if There is Expanding Dark Spot or Smoke when Using the Projector?
*Check if the fan noise increases or the fan stops working. Unplug the projector and contact Vankyo Team for assistance.
*Make sure the outlet and projector power adapter are not wet or humid which will cause sparks or smoke on outlet when power on the projector.
11. Why Does the Projector is Shut Off during Playing?
*Make sure the power plug is working and firmly fitted into the outlet.
*If the LED indicator on the projector is light up, but the fan doesn't work, please contact Vankyo Team for assistance.
*Overheat on the projector will activate built-in power-off protection panel. Restart the projector when it gets cooler.
*Overload of power when USB disk of 1TB or above is connected without external power supply will cause shutting off. Insert the disk when the projector is powered off or provide an
external power supply for disk would solve the issue.
31 / 32