Table of Contents
Advertisement
Introduction
The Alaris™ Gateway Workstation v1 .2 (hereinafter referred to as Workstation) has been designed as a modular system to provide a
communications gateway between an Alaris Infusion Pump (hereinafter referred to as Pump) and any Patient Data Management System
(PDMS), Patient Monitoring (PM) System, Hospital Information System (HIS) or Clinical Information System (CIS) that requires access to
the infusion data retained within the Pump .
Workstation Hardware Options
There are three different configuration options for the Workstation . To identify its configuration, refer to the labels on the front and back
of the Workstation .
Option 1. Basic or Auxiliary Workstation
This is an entry level Workstation with organization and central AC power supply functionality . It does not support PDMS connectivity . It
may be used as an Auxiliary Workstation to increase the number of Pumps needed at the bedside .
Option 2. Primary wired Workstation
This option is designed to accommodate connectivity to third party systems via a hospital wired network infrastructure . A Primary wired
Workstation can be coupled with one Auxiliary Workstation to send infusion data for up to 22 Pumps to third party systems .
Option 3. Primary wireless Workstation
This option is designed to accommodate connectivity to third party systems via a hospital wired or wireless network infrastructure . A
Primary wireless Workstation can be coupled with one Auxiliary Workstation to send infusion data for up to 22 Pumps to third party
systems .
1000DF00742 Issue 2
Alaris™ Gateway Workstation v1.2
REF
80203UNS01-32
SN:
T
135070253
17 .04 .2014
REF
80203UNS02-32
SN:
T
135070253
17 .04 .2014
REF
80203UNS03-32
SN:
T
135070253
17 .04 .2014
3/30
Introduction
Advertisement
Table of Contents
