Workstation Mounting Precautions - CareFusion Alaris Gateway Workstation Directions For Use Manual

Workstation Mounting Precautions

• When mounting the Workstation to a mounting option other than pole or equipment rail, the following
warnings must be observed:
– Warning: Ensure the mounting option is capable of supporting a fully laden Workstation (see
Product Specifications) prior to mounting .
– Warning: The Workstation should not be fitted to any other mobile mounting option unless the
stability and strength of the whole assembly has been evaluated to IEC/EN60601-1 .
– Warning: Do not overload the mounting option . To ensure stability follow the guidelines given in
the Product Specification section .
– Warning: Do not orientate the Workstation with the AC inlet or outlets exposed in the event of a
fluid spill .
• Pole Mounting
– Warning: Ensure the pole is capable of supporting a fully laden Workstation (see Product
Specifications) prior to mounting .
– Warning: Check that the pole clamp handle is in full working order before use .
– Warning: The pole clamp should be used to mount the Workstation on fixed poles / overhead
swing arm poles only .
– Warning: People of a weak disposition should not attempt to use / tighten the pole clamp system .
• Equipment Rail/Mobile Trolley Mounting
– Warning: Do not overload the trolley . To ensure stability follow the guidelines given in the Product
Specification section .
– Warning: The Workstation should not be fitted to any other mobile pole or drip stand unless the
stability and strength of the whole assembly has been evaluated to IEC/EN60601-1 .
– Warning: A mobile trolley mounted Workstation is recommended to be transported by two persons
when moving over an uneven surface or when the Workstation is fully loaded .
– Warning: Any rail system for supporting medical devices must comply with BSEN 12218:1999 .
Ensure the rail is capable of supporting a fully laden Workstation (see Product Specifications) prior
to mounting .
– Warning: Do not orientate the Workstation with the AC inlet or outlets exposed in the event of a
spill .
– Warning: When mounted to the Alaris Trolley and not in transport the Trolley brakes should be
engaged .
1000DF00742 Issue 2
Alaris™ Gateway Workstation v1.2
Operating Precautions
18/30