Table of Contents
Advertisement
Barcode Reader (optional)
Overview
The barcode reader (where fitted) allows the scanning and recognition of barcodes .
The Workstation must be powered down before attaching or disconnecting the barcode reader.
A
Visual Indicators
The barcode reader has two LED indicators (green and red) located on the top of the reader . When the reader is on, the LEDs indicate the
current status of the reader .
All LEDs off - The barcode reader is not receiving power or the barcode reader is in standby mode .
Steady Green - The laser is active .
Steady Green, Single Red Flash - The barcode has been read successfully .
Scanning a Barcode
1 . Make sure that the barcode is in the barcode reader scan field (within approx . 10 cm of the laser aperture) . The barcode reader is
automatically activated and the green LED is illuminated .
2 . Align the barcode with the visible laser line .
3 . The barcode reader will automatically scan the barcode .
4 . When the barcode reader successfully reads the barcode, the red LED will flash and the barcode reader will beep once . The barcode
data is transmitted to the Workstation .
Cable Connection
Laser Aperture
1000DF00742 Issue 2
Alaris™ Gateway Workstation v1.2
Barcode Reader (optional)
Green LED
Red LED
22/30
Advertisement
Table of Contents
