Controls And Indicators; Controls; Indicators - CareFusion Alaris Gateway Workstation Directions For Use Manual

Controls and Indicators

Controls

Symbol Description
a
ON/OFF Button - Press once to switch the Workstation on . Press and hold for two seconds to switch the
Workstation off . In the event that the system needs to be reset, press and hold for at least four seconds, then
press again to switch the Workstation on .
a

Indicators

Symbol Description
j
Battery Indicator - When illuminated the Workstation is operating from internal battery; when flashing the
battery power is low and auto power down is imminent .
j
k
AC Power Indicator - When illuminated the Workstation is connected to the AC power supply and the battery is
being charged .
k
A Status Indicator - Provides a visual indication of the internal software activity .
B Status Indicator - Provides a visual indication of communication activity of the network within the
Workstation .
d
ON Status Indicator - When illuminated the Workstation is powered on .
w
System Fault Indicator - The Workstation will illuminate this indicator when an internal fault is present and
detected .
1000DF00742 Issue 2
Alaris™ Gateway Workstation v1.2
Controls and Indicators
9/30