Table of Contents
Advertisement
Instructions for the user
Grids, caps, flame cap crowns and burners can be
removed for ease of cleaning. Wash them in warm
water using a non-abrasive detergent, taking care to
remove all tough spots. Before remounting, allow the
components to fully dry out. In fact, humidity residues inside the
burner holes might impair burner operation.
8.2.1 Ignition plugs and safety devices
For good functioning of the lighting ignition plugs and the
safety devices, keep them very clean.
Check frequently and clean with a damp cloth when
necessary.
8.2.2 The cover
Clean the glass or steel cover, where mounted, with warm water.
Never use abrasive sponges or detergents.
Never lower the cover when burners or electric elements are
on or still hot.
Attention: the glass lid may break if overheated. Make sure that
all the burners are switched off and let them cool down before
lovering the lid.
22
Advertisement
Table of Contents
