Cleaning; Safety; Responsibility Of The User; Operating Personnel - IMC CRONOSflex Getting Started

60 Attachment

5.4.3 Cleaning

Always unplug the power supply before cleaning the device. Only qualified service technicians are
permitted to clean the housing interior.
Do not use abrasive materials or solutions which are harmful to plastics. Use a dry cloth to clean
the housing. If the housing is particularly dirty, use a cloth which has been slightly moistened in a
cleaning solution and then carefully wrung out. To clean the corners, slits etc. of the housing, use a
small soft dry brush.
Do not allow liquids to enter the housing interior.
Be certain that the ventilation slits remain unobstructed.

5.4.4 Safety

This section provides an overview of all important aspects of protection of personnel for reliable and
trouble-free operation.
Failure to comply with the instructions and protection notes provided here can result in serious danger.

5.4.4.1 Responsibility of the user

The device is for use in commercial applications. The user is therefore obligated to comply with legal
regulations for work safety.
Along with the work safety procedures described in this instruction manual, the user must also conform
to regulations for safety, accident prevention and environmental protection which apply to the work site.
The user must also ensure that any personnel assisting in the use of the device have also read and
understood the instruction manual.

5.4.4.2 Operating personnel

Danger of injury due to inadequate qualifications!
Improper handling may lead to serious damage to personnel and property. When in doubt, consult
qualified personnel.
Work which may only be performed by trained imc personnel may not be performed by the user. Any
exceptions are subject to prior consultation with the manufacturer and are conditional on having
obtained corresponding training.
The instruction manual distinguishes the following degrees of qualification for performing various
actions:
Users of the measurement equipment. Fundamentals of measurement engineering.
Recommended: knowledge of foundations of electrical engineering. Familiarity with the Microsoft
Windows operating system. Users may not open or modify the device.
Qualified personnel is able, due to training in the field and to possession of skills, experience and
familiarity with the relevant regulations, to perform work assigned while independently recognizing
any hazards.
Warning
imc CRONOSflex Getting Started Version 1.8 - 08.01.2014