IMC CRONOSflex Getting Started page 31

Connecting via LAN in four steps 31
Then the "Local Area Connection Properties" window appears.
First click in the list on "Internet protocol (TCP/IP)" (1) und then on "Properties" (2). Please note the IP-
address (3) and your computer's subnet mask (4) as seen in the following example screen shots.
Settings for TCP/IP
Select Internet Protocol (TCP/IP)
If "Obtain IP-address automatically" (DHCP) is selected, no IP address is displayed. In this case, you have
to determine the current IP-address using the Command Prompt. Note, however, that automatically
obtained IP-addresses might change the next time the operating system is started! Start the Command
Prompt via the Windows Start menu by selecting Programs : Accessories: Command Prompt and then
enter ipconfig or ipconfig /all for more detailed information:
Result of the command "ipconfig"
imc CRONOSflex Getting Started Version 1.8 - 08.01.2014