Error Remedies, What Is New In This Version 1.5; Error Remedies In Version 1.4; Error Remedies In Version 1.3; Changes In Version 1.2 - IMC CRONOSflex Getting Started

4.5 Error remedies, what is new in this version 1.5

Version 1.5, released 27.07.2012
Topic
HRENC-4
new module: CRFX/UNI-4(-ET) with DSUB-15 plugs and CRFX/UNI-4-L(-ET) with LEMO plugs

4.6 Error remedies in version 1.4

German words in this version translated, released 02.11.2011

4.7 Error remedies in version 1.3

No error remedies in this version, released 09.09.2011
New input power supply plug (female) as of September 2011, please consider description

4.8 Changes in version 1.2

Getting started released: 22.07.2011
Topic
Included accessories

4.9 Error remedies in version 1.1

Getting started released: 01.07.2011
Topic Alteration
CRFX/BR2-4 Required software version: imc DEVICES 2.7 R3 SP5
14 kHz analog signal bandwidth voltage mode (-3 dB), see overview
Isolation Concerning the isolation of imc CRONOSflex Modules' electronics from their respective
frames, there are different options: modules both with isolated measurement inputs (e.g. ISO2-
8) and without isolated measurement inputs (e.g. UNI2-8) are available.

4.10 Error remedies in version 1.0

No error remedies - first version, released 07.02.2011
Alteration
The index signal has to be connected to the first plug (female) CON 1 (IN1 and IN2)! This
has been corrected in this instruction book version, the following chapter are
corrected: module description, technical details and pin configuration. The second plug
were accidently stated in those chapters.
Alteration
AC/DC power adapter 110-230 VAC 50-60 Hz / 48 V DC / 150 W
59
imc CRONOSflex Getting Started Version 1.8 - 08.01.2014
Error remedies, what is new in this version 1.5 55