Wetted Parts - vacuubrand ME 4C NT VARIO Instructions For Use Manual

Wetted parts

Components
Pump
Head cover
Diaphragm clamping disc
Diaphragm
Valves
O-rings
Valve head (pumps NT VARIO)
Housing cover insert (pumps VARIO-B / PC 301x) PTFE carbon reinforced
Gas ballast tube, inlet, outlet (pumps NT VARIO)
Inlet (pumps VARIO-B)
Outlet (pumps VARIO-B)
Silencer // hose to silencer
Fittings (pumps VARIO-B / PC 301x VARIO)
Tubing
Pumping unit
Inlet pumping unit (PC 300x / PC 301x VARIO)
Outlet pumping unit
Distribution head (inlet PC 300x)
Tubing
Screw-in fittings
O-ring at the catchpot
Overpressure safety relief device
Blind plug (inlet PC 300x VARIO)
Exhaust waste vapour condenser / catchpot / col-
lecting flask
Catchpot (inlet PC 301x VARIO)
Drain screw (catchpot PC 301x VARIO)
O-rings (catchpot PC 301x VARIO)
CVC 3000
Sensor
Vacuum connection (pump NT VARIO)
Vacuum connection (PC 300x VARIO)
Sensor housing
Sensor seal
Venting valve seal
Documents are only to be used and distributed completely and unchanged. It is strictly the users' responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999164 / 19/05/2009
page 14 of 75
Wetted materials
ETFE carbon fibre reinforced
ETFE carbon fibre reinforced
PTFE
FFKM (ME 4C NT VARIO: PTFE)
FPM
ECTFE carbon fibre reinforced
PTFE carbon reinforced
Stainless steel
ETFE
PBT/PVF // PVC
ETFE/ECTFE
PTFE
PP / Stainless steel
PET
PPS glass fibre reinforced
PTFE
ETFE / ECTFE
FPM
Silicone rubber / PTFE foil
PP
Borsilicate glass
PMP
Steel
NBR
Aluminium oxide ceramic
PP
PP / PVDF
PPS / glass fibre
Chemically resistant fluoroelastomer
FPM
We reserve the right for technical modification without prior notice!