Table of Contents
Advertisement
Gas inlet temperatures
Operating condition
Continuous operation
Continuous operation
Short-time (< 5 minutes)
Wetted parts
Components
Housing cover
Head cover
Diaphragm clamping disc
Diaphragm
Valves
O-rings
Small flange
Hose nozzle
Silencer
Overpressure safety relief device
Tubing
Fittings
Seal rings (ME 16 / MD 8)
Seal rings (MD 12 / MV 10)
Documents are only to be used and distributed completely and unchanged. It is strictly the users' responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 997832 / 03/02/2009
page 10 of 26
Inlet pressure
> 100 mbar (high gas load)
< 100 mbar (low gas load)
< 100 mbar (low gas load)
Wetted materials
aluminium alloy (AlSi12)
aluminium alloy (AlSi12)
aluminium alloy (AlSi12)
FPM
FPM
FPM
stainless steel
PBT
PA / PE / aluminium alloy
silicone
PE
aluminium anodized
PVC
FPM
We reserve the right for technical modification without prior notice!
Permitted range of gas
temperatures at inlet
+10°C to +40°C
0°C to +60°C
-10°C to +80°C
Advertisement
Table of Contents
