9
9.3 Display Test
Display test of the screen can be carried out as follows:
If you are at the front panel, go to the Home page
►
Choose Info
►
Go to Display Test
►
The display will alternate between black and white. Press any button to
stop the test.
9.4 Checking Errors and Warnings
The status LED on the display shows when a warning or error has taken
place ( see Chapter
is possible to get more information on the errors/warnings (see Figure 9-4). It
is also possible to 'accept' the errors/warnings. Hereby it will be written in the
Logbook of the meter and will no longer influence the status LED on the
meter.
Go to the Home page
►
Choose Error List
►
A list of the errors is displayed
UFM Series 6
Q.Sonic-plus
Figure 9-3: Display Test
7.1 LED at Display
Operation and Maintenance
Verifying Software Versions
[p.33]). Through the front panel it
Page 59 of 68