IBM 5100 Maintenance Information Manual page 101

(
(
Display
Display is a DCP1 normal mode function. To use this
function, you must load DCP and then press the D key
and enter the starting address of the location of the
read/write storage that you want to display.
The display now shows 32 sequential locations of
read/write storage starting with the input address.
Scroll up
(t)
displays the next 16 bytes, and scroll down
(+) displays the previous 16 bytes. The SPACE bar
returns control to DCP1. To exit from DCP1 press and
hold the CMD key; then press the
+
(plus) key on the
numeric keyboard.
To display storage locations using a different starting
address, enter D and the new starting address.
Entry Format
Example:
nCPl
DCPl.
D 0120
ADDR
0120 0000 0l.B2 019C OOlD OlAO OIAl. 0000 0000
0130
Valid Input Keys
D
t
0-9, A-F
OB56 OOl8 OOIA 0272 0276 027A 027E 0282
Calls the display function to
display read/write storage.
Scrolls forward; displays the
next 32 bytes.
Scrolls backward; displays the
previous 32 bytes.
Enters hex characters.
Valid Input Keys
SPACE bar
CMD and
*
or
x (multiply on
the numeric
keyboard)
CMD and +
(plus on the
numeric
keyboard)
Cancels the requested fUnctidn.
To turn off the PROCESS CHECK
light, press the RESTART key.
Calls the DCP1 diagnostic mode.
Returns to the customer program
if the DCP1 diagnostic mode has
not been called.
5100 Diagnostics Overview 3-19