Gree GVH24AK-K3DNC6A Owner's Manual page 32

Precautions of Installation
Requirement of electric safety
Disposal of electric wire
grounding device of building. An electricity leakage protection switch and air
2. The power must adopt rated voltage and specialized circuit of air conditioner.
3. The diameter of power cord must accord with related requirement.
4. Perform installation according to national wiring rules.
5. Proper grounding measure must be applied.
6. Do not pull the power cord forcibly.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Basic requirements
As the power of air conditioner is relatively big, the circuit for power supply
of air conditioner must meet the following requirements:
1. It must be a specialized brand circuit included the electric leakage protector with
2. Including an air switch with suitable capacity, please note the following table. Air
switch should be included magnet buckle and heating buckle function, which
can protect the circuit-short and overload. (Caution: please do not use the fuse
only for protecting the circuit.)
3. The capacity of wire diameter shall be 1.5 times bigger than the maximum
current of air conditioner.
should be 1.5m.
should be all-pole parting and the contact parting distance should be more than
3mm.
Note:
ding conditions (ambient temperature, direct sunlight, rain, etc.).
● The power cord and power connection wire shall apply cooper core cable which
accords with national standards.
● Indoor unit and outdoor unit shall be grounded reliably.
Air-conditioner Air switch capacity
24K
30
25A