Gree GVH24AK-K3DNC6A Owner's Manual page 11

Function Buttons and Displayer
Slide bar
When the unit is not in function setting
●
while in unit on status, touch the slide
bar to make it slide from left to right to
increase set temperature; touch the
slide bar to make it slide from tight to
left to decrease set temperature;
temperature setting range is 16℃～
30℃ (The slide bar is not available
for setting temperature under auto
and E-joy modes).
●
●
display
●
Slide bar
●
button
Slide bar
Under function setting status, press
function button to select the function.
That function's character will flash and
then confirm or cancel it.
When timer function is being set by
Function button, timer time can be set
within the range of 0.5-24h by touching
slide bar.
When other functions except timer
function is being set by Function button,
the corresponding function can be turned
on by touching the slide bar to make it
slide from left to right; the corresponding
function can be turned off by touching the
slide bar to make it slide from right to left.
Pressing " " and "
same time for 3s, all button functions on
the displayer are shielded.
When pressing any button, the buzzer will
give out a sound and "LC" will blink on the
nixietube for three times to remind user that
the buttons are locked and then resume
normal display. Press these two buttons at
the same time for 3s again to cancel
shielding function and then the display
resumes normal status.
Pufity button
Press this button can
●
Pufity function.
9
" button at the
turn on or turn off