Gree GVH24AK-K3DNC6A Owner's Manual page 16

Introduction for buttons on remote controller
● Under fixed-angle swing mode, press this button and the left and right swing status
will change in the sequence as below:
9
Mode button
Press this button and the mode will change in the sequence as below:
Note:
● Heating mode is invalid for cooling only unit.
● After selecting auto mode, remote controller won't display set temperature. Air
conditioner will select proper operation method according to indoor temperature
to comfortable environment.
10
Turbo button
When pressing this button under cooling or heating mode, air conditioner will enter
into quick cooling or quick heating mode. The character of " Turbo" is displayed on
remote controller. Press this button again to exit turbo function and the character
of " Turbo" will be disappeared on remote controller.
11
Fan button
Press this button can select the fan speed in the sequence as below:
Note:
● The unit can only operate at low speed ( ) under dry mode.
12
Quiet button
Press this button can turn on (display the character of "Quiet") or turn off (not display
the character of "Quiet") quiet function.
Note:
● Quiet function is defaulted to be turned off after energization.
● Quiet function is only applied for cooling mode.
AUTO COOL
Fan Auto
OFF
DRY FAN
14
HEAT