Circuit Breakers And Fuses - Labrie Pendpac WITTKE RETRO FL Maintenance Manual

Figure 3-10 Harness

Circuit Breakers and Fuses

Power for the W
ITTKE
4 manual reset circuit breakers.
Auto-Reset Circuit Breakers
Main battery power
Main ignition power
Manual Reset Circuit Breakers
There are three white circuit breaker buttons to reset these circuits. They are located on front of the
in-cab box (see Figure 3-11).
Caution!
Never hold a circuit breaker button down when it refuses to reset. Severe electrical damage
may result. Report this to your supervisor and maintenance department.
N : Consult the OEM manual for information on equipment not manufactured by Labrie.
OTE
TM
R F electrical system is protected by 2 auto-reset circuit breakers and
ETRO L
Function Amps
50
15
Location
Fitted under the street side dash to
protect the packer system circuits that
utilize ignition power (alternate
location: fitted in the battery box to
protect the packer system circuits that
utilize battery power)
Fitted under the street side dash to
protect the packer system circuits that
utilize ignition power.
Maintenance 71