Labrie Pendpac WITTKE RETRO FL Maintenance Manual page 51

The lift beam should be 20.32 cm x 10.16 cm x 20.32 cm (8 in. x 4 in. x 8 in.) with .9525 cm (3/8
in.) grade 80 lift chains with a working load limit of 3.2206 tonne (7100 lbs.) at 90 degrees.
To lift the front body:
1.
Secure the rear body.
2.
Raise the arms and forks until they are resting on the rubber arm stops on the sides of the body.
3.
Insert a lift spool into each end of the arm pivot tube.
4.
Wrap a lift chain around each lift spool and fasten the grab hooks securely on each chain
(see Figure 2-7).
5.
Lift the front body.
Figure 2-7 Lift spool
Safety 41