Employee Responsibilities - Labrie AUTOMIZER HELPING-HAND Operator's Manual

 To establish a "lockout/tagout" procedure and ensure its application any time inspection, repair
or maintenance is performed on the vehicle, regardless of whether it takes place on the road or in
the garage.
 To provide necessary safety equipment and apparel.
 To ensure that all vehicle safety features, such as tailgate props, are properly used by all personnel
when operating or servicing the vehicle.
Do not allow operation of the 2R-III
I :
MPORTANT
immediately.

Employee Responsibilities

It is the responsibility of the employee:
 To enforce all safety measures to meet the requirements established by the employer.
 To operate the 2R-III
 To carefully read this manual.
 To ensure, prior to and during operation of equipment, the following:
• During all phases of dumping or packing process, area is clear of persons, including time when
tailgate is open and/or closed. Operator is to instruct persons NOT to cross under an open
tailgate.
• Manufacturer's recommended operating and safety instructions are taken into account.
 To use the vehicle only as intended.
 To obey proper operating procedures, safety guidelines and warning decals.
 To perform a daily vehicle inspection that includes all operating systems, all vehicle safety
equipment (parking brake, lights, back-up alarm, horns, tires, safety interlock switches, etc.) and
safety decals.
 To immediately report any malfunction or damage to the vehicle to the employer or supervisor.
I : Under no circumstances should you operate damaged or malfunctioning equipment. Report all
MPORTANT
malfunctions to your supervisor immediately.
 To ensure that all mirrors, windows and lights are clean and properly adjusted prior to operating
the vehicle.
 To ensure that all cameras and monitors, if installed, are properly adjusted and function correctly.
 To make sure that nobody is near the vehicle before activating any of the controls, and to be
prepared to stop at any indication of possible danger.
 To use extreme caution when operating machine in dangerous areas such as: slopes, overhangs,
high walls, ridges or ditches.
 To always utilize the vehicle's safety features, such as tailgate props.
 To wear all safety equipment prescribed by your employer.
Safety is always of prime importance when operating any type of equipment. All operators working
I :
MPORTANT
with the 2R-III
TM
if damaged or malfunctioning. Have all repairs performed
TM
only after having received instruction and training.
TM
must be aware of the safety practices and features detailed in this section.
Safety 11