Schedule - ActronAir Que Touch Series User Manual

Schedule

To create a 7 day programmed event, ' Menu ' > Schedule.
NOTE: Maximum of 6 actions per day. For detailed and advanced
programming visit ActronAir website.
1 On the next screen, select by touching a day.
2 Create the first action by touching and holding the preferred
time on the screen, until the action banner appears.
3 In the banner, select the desired action for the event.
Example, switch AC On/Off to the right to turn the AC ON at
that time.
• Automatically turn the system or zone ON or OFF.
• Away Mode - to activate or de-activate 'Away' set
temperature set point.
• Quiet Mode - to activate or deactivate low
noise operation.
4 Touch ' ' to close the event options banner.
14
Repeat steps 3 and 5 to create second action. Example, turn
5
the AC system OFF. Touch ' ' after programming the second
event. If required, touch the 'Zones' balloon to target a
specific zone/s for this program.
From zone list, select which of the zones will be included in the
6
schedule. Slide the switch to the right to activate and to the left
to deactivate. Then press 'Ok'.
NOTE:
Away and Quiet mode options are global settings. You cannot set this
per zone.
Touch 'Save'.
7
NOTE:
It is still possible to adjust the time created by touching and hovering
the action marker across the screen.
From schedule screen, the event created on the day will be
8
shown. Slide the schedule switch to the right to activate.
When on the home screen, the status will show the calendar
9
icon, indicating that the schedule is active.
15