Table of Contents
Advertisement
Message
Garment Misfeed
Press the Tray key to remove the tray from the machine and then remove the garment
from the tray.
Ensure that the garment is set on the tray correctly. If you cannot remove the tray, then
turn the machine off and then back on again.
Cause
• Something is blocking the movement of the carriage unit.
• Garment is not loaded in the cassette properly.
Details
The machine detected an obstruction blocking operation of carriage unit at power
ON or after stuck fabric was removed.
Action
1. Open the top cover.
2. Press the [Tray] key.
3. Remove the stuck fabric or foreign object through the top cover opening.
4. Close the top cover.
Jam 26
Cassette height error jam
Message
Garment Misfeed
Adjust height with the Adjust Height key, then press the Start key to restart printing or
press the Tray key to remove the tray and reset the garment correctly.
Cause
The printing surface of the garment is not flat. Wrinkles, slacks or flat remain on the
printing surface.
Details
After adjusting the height of the cassette, the height sensor detects the garment again.
Action
• Adjust the height of the cassette up and down by pressing the [Adjust Height]
keys, and then press the [Start] key to resume printing.
• Press the [Tray] key to remove the jammed garment, and then reload it.
Jammed garment location
Only fabric jams that occur in the cassette are displayed as a JAM code. (The branch code that
indicates the position of the jam inside the machine is limited to "00".)
Error Codes
267
Advertisement
Table of Contents
