SmartLogger1000
User Manual
LCD
----End
6.2.19 Querying Alarm Records
This topic describes how to query active and historical alarms for the SmartLogger and the
connected inverters and how to set the alarm record sort mode on the monitoring panel.
Context
The LCD displays a maximum of 8000 latest alarm records.
Procedure
Issue 12 (2019-01-15)
The following table describes the procedure for querying active and historical alarms and
setting the alarm record sort mode. The parameter values in the figures are for reference
only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
2. Select
and press
3. Select a custom device and press
NOTE
Custom Device1 (2-1) in the left figure indicates
that the custom device is connected to the Port 2 of
the SmartLogger, and its RS485 communications
address is 1.
6 User Interface
.
.
102