Querying Plc Information - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
LCD
----End

6.2.11 Querying PLC Information

This section describes how to query the running information and version of a PLC connected
to the SmartLogger.
Procedure

Issue 12 (2019-01-15)
The following table describes the procedure for viewing the information about a PLC.
The parameter values in the figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
5. Set User name and Password.
NOTE
Because of the limited permission, select User
name as Advanced User. The initial password for
Advanced User is 000001.
6. Choose Running Param. and press
6 User Interface
.
83