Clearing Data - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
LCD
----End

6.2.35 Clearing Data

This topic describes how to delete alarm and performance data on the monitoring panel.
Context
Clear data if the SmartLogger location changes and its historical data need to be deleted.



Procedure

Issue 12 (2019-01-15)
After the data clear operation is performed, all information stored on the SmartLogger,
including energy yield, performance data, and alarms, will be removed.
After the data clear operation is performed, the devices connected to the SmartLogger are
not removed. If an original device will not connect to the SmartLogger, remove the device.
If you perform Data Clear on the SmartLogger, you also have to perform Alarm Reset on
the NMS. Otherwise, the alarm information collected by the NMS and SmartLogger will
be different.
The following table describes the procedure for clearing data. The parameter values in
the figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
18. Choose Batch Reset and press
confirm the batch reset operation.
6 User Interface
to
146