Operation Mode; Airflow Rate; Set/Setback Temperature Display; Defrost/Hot Start - Daikin BRC1E63 Operation Manual

1. Operation Mode

• Displays the present operation mode,
"Cool", "Heat", "Vent", "Fan", "Dry" or "Auto".
2. Airflow Rate (Airflow level/
Fan Speed)
•
indoor unit.
•
control function.
3.
•
swing are set (Refer to page 12).
• This icon is not displayed if the indoor unit
directions.

4. Set/Setback Temperature display

• When the air conditioner is turned on, "Set
to" indicates the set temperatures that are
set for the air conditioner.
• When the air conditioner is turned off,
"Setback" indicates the setback
temperatures that are set for the air
conditioner.

5. Defrost/Hot start "

(Refer to page 13.)
Displays if the Defrost/Hot start operation is active.
If ventilating operation "
• Displayed when a Heat Reclaim Ventilator
is connected.
For details, refer to the Operation Manual of
the Heat Reclaim Ventilator.
6. Message
The following messages are displayed.
"This function not available."
• Displayed for a few seconds when an
operation button is pressed and the indoor
unit does not have the corresponding
function.
"
"
" is displayed:
• If a number of indoor units are in operation,
the message will appear only if none of the
indoor units is provided with the
corresponding function, i.e., the message
will not appear if at least one of the indoor
units is provided with the corresponding
function.
"Error: Push Menu button"
"Warning: Push Menu button"
• Displayed if an error or warning is detected
(Refer to page 67).
"Quick Start" (Split system only)
• Displayed if the quick cooling/heating
function is turned on (Refer to page 30).
"Time to clean element"
•
or element has come (Refer to
page 65).
7. Ventilation/Air Purifying
• Displayed when a Heat Reclaim Ventilator
is connected.
• Ventilation Mode icon. "
These icons indicate the current ventilation
mode (Heat Reclaim Ventilator only)
(AUTOMATIC, ENERGY RECLAIM
VENTILATION, BYPASS).
• Air purifying icon "
This icon indicates that the Air Purifying
unit (optional accessory) is in operation.
8. Key Locked "
(Refer to page 20.)
• Displayed when the key lock is set.
9. Timer Enabled "
(Refer to page 40 and 48.)
• Displayed if the Schedule timer or
OFF timer is enabled.
"
"
"
"
8