Sensing Sensor (Low) - Daikin BRC1E63 Operation Manual

Sensing Sensor (Low)
This function cannot be used at the time of group control.
In case of the simultaneous operation system, the system is controlled by the sensing
sensor mounted in the master indoor unit.
Operation
1
Energy Saving Options
Energy Saving List
Setpoint Range
Setback Condition

Sensing Sensor (Low)

Sensing Sensor (Stop)
Setpoint Auto Reset
Return Setting
2
Sensing Sensor (Low)
Adjust Cool SP:
Adjust Time Cool: 30 min
Limit Cool SP: 30°C
Adjust Heat SP: 1.0°C
Adjust Time Heat: 60 min
Limit Heat SP: 15°C
Return Setting
3
Sensing Sensor (Low)
Save the settings?
Yes
Return Setting
37
• Display the Energy Saving Options screen (Refer
1/2
to page 34).
• Press "
Sensing Sensor (Low)
Press Menu/Enter button to display the Sensing
Sensor (Low) screen.
• Press "
1.0 °C
of saving energy operation when the sensor
detects the absence.
• Press "
Press Menu/Enter button after selecting the item.
(Example)
• If it is determined that there is no person in the
room by sensor during Cooling Operation, the set
temperature will automatically shift by 1°C every
30 minutes until the set temperature is 30°C.
(On Basic screen, set temperature does not
change.)
• Press "
and return to the Basic screen.
No
" buttons to select
.
" buttons to change the setting value
" buttons to move the cursor.
Adjust Cool SP : 1.0°C
Adjust Time Cool : 30 min
Limit Cool SP : 30°C
" buttons to select
Yes
.