Sensing Sensor (Stop) - Daikin BRC1E63 Operation Manual

Sensing Sensor (Stop)
This function cannot be used at the time of group control.
In case of the simultaneous operation system, the system is controlled by the sensing sensor
mounted in the master indoor unit.
Operation
1
Energy Saving Options
Energy Saving List
Setpoint Range
Setback Condition
Sensing Sensor (Low)

Sensing Sensor (Stop)

Setpoint Auto Reset
Return Setting
2
Sensing Sensor (Stop)
Unocc Stop On/Off:
Unocc Stop Time: 1 hours
Return Setting
3
Sensing Sensor (Stop)
Save the settings?
Yes
Return Setting
• Display the Energy Saving Options screen (Refer
1/2
to page 34).
• Press "
select
Press Menu/Enter button to display the Sensing
Sensor (Stop) screen.
• Press "
operation when the sensor detects the absence.
OFF
• Press "
Press Menu/Enter button after selecting the item.
• Press "
and return to the Basic screen.
No
" buttons to
Sensing Sensor (Stop)
" buttons to set the saving energy
" buttons to move the cursor.
" buttons to select
.
Yes
.
38