Cool/Heat Selection Eligibility - Daikin BRC1E63 Operation Manual

3
Cool
Set to

Cool/Heat Selection Eligibility

• The "Cool", "Heat", "Auto" can be set by only the remote controller that has the cool/heat selection
elig bility.
(The display "Auto" will appear for the Heat Recovery System only.)
The remote controller with
the selection elig bility
1.
(Icon "
(Changeover Under
Control) is not displayed)
The remote controller with
the selection elig bility
2.
(Icon "
(Changeover Under
Control) is not displayed)
19
• Press Mode Selector button on the remote
controller that has the cool/heat selection
28
eligibility (the remote controller without the icon
°C
"
selected.
The display will change to "Fan", "Dry", "Auto",
"Cool", "Heat" each time the button is pressed.
• The display "Auto" will appear for the Heat
Recovery system only.
Simultaneously, the other remote controllers will
follow suit and change the display automatically.
Set to "Cool", "Heat",
" "Dry", "Auto" mode.
Set to "Fan" mode.
"
") several times until the desired mode is
Other remote controllers
• The system will go into the mode set in
• However, the system can be switched
Other remote controllers
(Icon " "
(Changeover Under
Control) is displayed)
the remote controller with the selection
elig bility. Other modes are not
available.
to "Fan" mode.
In case of "Cool" or "Dry" mode, the
system can be switched to "Dry" mode
from "Cool" mode and to vice-versa.
(Icon " "
(Changeover Under
Control) is displayed)
• The system cannot be set to other
modes except fan mode.