Daikin BRC1E63 Operation Manual page 23

Setting and display items
Energy Setpoint Auto Reset
Saving
Options
Off Timer
Auto Display Off
(All series
correspond)
Energy
consumption
Schedule
Enable/Disable
Select Schedule
Holidays
Settings
Filter Auto Clean
Description
Even if the set temperature is changed, it returns
to the preset temperature after progress of a
defined period of time.
After you turn on the air conditioner, it will
automatically turn off in a defined period of time.
• Poss ble to set in 10 minutes increments
from 30 to 180 minutes.
While operation stopping, can turn off the LCD
display.
It will be displayed again if press any button.
Note: Can be selected 10 minutes, 30 minutes,
60 minutes, and OFF, initial setting is 30 minutes.
An energy consumption until now is displayed.
This enables you to evaluate the trend of the
energy consumption.
Note: This function availability is depending
on type of indoor unit.
Note: This function is not available in case more
than 1 indoor unit are connected in group to the
remote controller.
Note: Displayed energy consumption is not
result of a kWh measurement, but results from
a calculation with running data of the air
conditioner.
Some factors in this calculation are absolute
values, but other factors merely result from
interpolations with tolerance. This explains
why the readout may deviate from the actual
electricity consumption.
Enable or Disable of a schedule function can
be changed.
The schedule number that must be active can
be selected (schedule nr 1, 2 or 3).
Convenient holiday settings and temporary
closure settings are possible.
•
Set the startup time and operation stop time.
• ON: Startup time, cooling and heating
setting temperature can be configured.
• OFF: Operation stop time, cooling and heating
setback setting temperature can be configured.
(--: Indicates that the setback function is
disabled for this time period.)
_: Indicates that the setting temperature and
setback setting temperature for this time
period is not specified. The last active
setting temperature will be utilized.
• Up to 5 actions can be set for each day.
This function is available only on the model whose
panel has filter auto clean function.
For detailed operation refer to the operation
manual of these models.
Reference page
39
40
41
42
48
44
45
46
49
22