Measurement Transmission; Eeprom Error Management - Scaime eNod4-B ETHERNET User Manual

Address Modbus RTU
0x0000
The 12 LSB bits define the software version (073
eNod4).

3.7 Measurement transmission

As a master/slave protocol, measurement transmission in Modbus protocol is only done on master request.

3.8 EEPROM error management

Functioning and calibration parameters are stored in EEPROM. After every reset the entireness of parameters stored
in EEPROM is checked. If a default appears, measurements are set to 0xFFFF and default is pointed out in
measurement status.
Meaning
SW and product version
= 115) and the 4 MSB bits define the product version (6
H
User manual SCAIME:
NU-soft-eNod4B-ETH-E-0716_236709-C.doc
Access
RO
14/108
Type
Uint
for the
H