Setup.mode - Panasonic AK-HRP200G Operating Instructions Manual

Setup.mode

Setup.mode
Setup mode allows the user to make a variety of unit settings, and save and load scene files and user files.
Normal operation is unavailable during setup mode operation. ROP menu (REMOTE OPERATION MENU) operation is not available either.
„ Setup.mode.functions
„
Setup mode allows you to do any of the following.
The functions for camera recorder (serial connection) are identical to those for camera recorder (IP connection).
Item Adjustable.range
1 Set camera number Sets a camera number.
2 Save scene file to/ Saves the currently used scene
load scene file from file to a memory card. It also
memory card allows you to load a scene file
stored on a memory card.
3 Save user file to/ Saves the currently used user
load user file from file to a memory card. It also
memory card allows you to load a user file
stored on a memory card.
4 Save lens file to/ Saves the currently used lens
load lens file from file to a memory card. It also
memory card allows you to load a lens file
stored on a memory card.
5 Save ROP Save a configuration file for
configuration the unit to a memory card.
file to/load ROP It also allows you to load a
configuration file configuration file for the unit
from memory card stored on a memory card.
6 Format memory Formats a memory card
card
7 Select/set flare and Selects the flare and pedestal
pedestal control function
8 Set buzzer (beep/ Enables or disables the buzzer
call tone) or call tone.
9 Set display Sets the brightness of the panel
brightness (LED/7- LED and 7-segment display.
segment display)
10 Set IP address Sets the IP address of the unit
11 Set subnet mask Sets the subnet mask of the unit.
12 Sets the default gateway of the
Set default gateway
unit.
13 Set port Sets the port of the unit.
14 Save/load Saves the data recorded by the
remote camera remote camera to a memory card.
configuration file It also allows you to load a camera
file stored on a memory card.
15 Set serial Switches between the CCU
serial, remote camera serial and
camera recorder serial when the
unit is in serial connection mode.
16 Initialize settings Initializes unit settings.
17 Confirm version Displays the version of the
software used by the unit.
18 Save unit data to Saves unit data to a memory
memory card card.
19 Upgrade software Upgrades the software used by
the unit.
20 Set tally number Sets the camera number to
assign to tally input.
21 Set tally output Enables or disables tally output.
22 Syncro shutter When using syncro shutter,
display setting switches between SEC and
DEG display.
23 Tally control setting Specifies whether tally control is
performed via panel operations
or preview terminal inputs.
The setup mode menu differs depending on the operation mode and connection configuration.
6
ROP.Serial.connection.
mode
Display
CCU.
(serial.
connection)


















ROP.IP.connection.mode
Remote. Remote.
CCU
camera. camera.
(serial.
(serial. (serial.
connection)
connection) connection)



  
  
  
  
  
  
  
  
  

  
  
  
  
 
 
Remote. Camera.
CCU.
camera. recorder.
(IP.
(IP. (IP.
connection)
connection) connection)



  
  
  
  
  
  
  
  
  

  
  
  
  
 
 

