System (2/2) - Panasonic AK-HRP200G Operating Instructions Manual

ROP.menu.setting.
(continued)
Item Display
UP.CONVERT.
MODE
HD.COLOR.BAR
BARS-1
BARS-2
BARS-3
BARS-4
BARS-5
BARS-6
PATHO
SDI3-4.OUT NORMAL
Function
SC Selects the video up-
SQ
conversion system used
LB
for SD SDI and VBS return
videos.
Select the signal format for
input.
FULL Select the color bar signals to be
output from the HD/SD SDI OUT
ARIB connectors and VBS connector
when "BAR" has been selected
on the operation panel of the
ROP.
When they are output in VBS
or SD format, color bars in HD
format are output in the mode
specified with
DOWNCONVERT MODE.
FULL:
75 % full field color bar
BARS-1:
Color bar based on the
SMPTE standard
ARIB:
ARIB multi-format color bar
BARS-2:
Color bar based on the EIAJ
standard
BARS-3:
Split field color bar
BARS-4:
75 % full field color bar placed
in an area with a 4:3 aspect
ratio.
(Displayed 40 % gray outside
the area.)
BARS-5:
Color bar based on the
SMPTE standard that is
placed in an area with a 4:3
aspect ratio.
(Displayed 40 % gray outside
the area.)
BARS-6:
Color bar based on the EIAJ
standard that is placed in an
area with a 4:3 aspect ratio.
(Displayed 40 % gray outside
the area.)
OFF Select ON/OFF for the
ON pathological signals.
Selects the signals output from
PM the 3rd and 4th HD/SD SDI
signal output connectors on a
CCU.
SYSTEM.(2/2)
→＊＊ ＳＹＳＴＥＭ （ ２／２ ） ＊＊
ＨＤ Ｈ ＰＨＡＳＥ
ＳＤ Ｈ ＰＨＡＳＥ
ＳＤ－ＨＤ Ｖ
ＭＩＣ１
ＭＩＣ２
Item Display
HD.H.PHASE -1099
1099.(59.94.Hz)
-1319
1319.(50Hz)
SD.H.PHASE
857.(59.94Hz)
863.(50Hz)
SD-HD.V
ADVANCE
0H_SD_DLAY.
MIC1.GAIN
０
０
０Ｈ
ＧＡＩＮ ＡＭＰ
６０dB ０dB
６０dB ０dB
( indicates factory default settings.)
Function
Adjusts the horizontal phase of
‫׀‬ HD SDI video for the genlock
0 reference phase.
‫׀‬
‫׀‬
0
‫׀‬
-857 Adjusts SD horizontal sync
‫׀‬
phase.
0
‫׀‬
-863
‫׀‬
0
‫׀‬
0H Set the vertical phase of the
HDTV output in relation to the
SDTV output.
0H:
Sets the vertical phase to the
same phase.
ADVANCE:
When the field frequency is
59.94 Hz, the phase advance
is 90H.
When the field frequency is 50
Hz, the phase advance is 75H.
0H_SD_DLAY:
The SDTV signals are delayed
and set in-phase with the
HDTV signals.
• When the setting of this item
is set to "0H" or "ADVANCE"
while the field frequency is
50 Hz, images in SD format
are delayed by 1 frame + 75
lines only when letterbox is
selected for DOWNCONVERT
MODE.
For the relationship with the
sync phase, refer to Operating
Instructions <Operations and
Settings> of AK-HCU200.
ADVANCE:
. 59.94Hz→90H
. 50Hz→75H
20dB Performs coarse adjustment of
40dB MIC1 gain.
60dB
29