Siemens SICAM P38 Manual page 35

Note
For P39 device, the second communication port parameter setting can not be changed.
3. Parameter setting with keys (take "Conn communication setting" for example)
Figure 4-2
At any time, press "
means password level and the remaining 6 data make up the password (press "▲" to change digits and "▼"
to move cursor). Press "
enter password, press "
reached, parameter setting function will be locked for certain period which is configurable in advance). If the
password is validated, you may enter the first-level menu. The figure shows the read-write items under "Conn"
menu: baud rate and communication address of RS485 port can be set.
Note
"SURE" screen appears after selecting or inputting parameter and pressing "
again to activate new parameter. Pressing "
return to previous menu.
■
SICAM P38 P39, 3-phase Power Meter with Multi-Tariff function, User Manual
E50417-H8940-C564-4, Release Date 06.2018
Parameter Setting with Keys
" and " " simultaneously to enter "PASS" screen. The first digit of displayed data
" to confirm. "FAIL" will appear if password level and password are wrong. To re-
". To quit and return to cyclic display state, enter "
" at any time during parameter setting will cancel setting or
Operation and Display
4.3 Key Definition
" (if specified error count is
". Press " " once
35