Appendix K: Sel-5030 Ac Sel Erator; Introduction; Ac Sel Erator System Requirements - Schweitzer Engineering Laboratories SEL-311L Instruction Manual

APPENDIX K:
I
NTRODUCTION
The SEL-5030
AC
your SEL-311L Relay.
Using the SEL-5030
•
Create, test, and manage settings with a Windows
•
Visually design SEL
•
Verify SEL
•
Analyze power system events from SEL relays with integrated Waveform and Harmonic
Analysis tools.
•
Communicate with SEL devices via an HMI interface with integrated Meter and Control
functions.
•
Create, manage, copy, merge, and read relay settings with a settings database manager.
This document gives instructions for installing the SEL-5030
guide is available as part of the online help. After installation, the Quick Tour will show how to
create a circuit breaker (CB) simulator. The CB simulator is useful for testing and evaluation.
Note: Like all SEL relay products, the SEL-311L can also be set and operated by a simple
ASCII terminal.
SEL S
AC ERATOR YSTEM
CPU: Pentium class (recommended 90 MHz or faster)
Operating System:
Disk Space: 25 Mb
Communications: EIA-232 serial port for communicating with the relay
CD drive: required for installation
Date Code 20011017
SEL-5030
AC
SEL is an easy-to-use yet powerful tool to help get the most out of
ERATOR
SEL , you will be able to:
AC ERATOR
®
control equations with a powerful Logic Editor.
OGIC
control equations with an integrated Logic Simulator.
OGIC
R
EQUIREMENTS
Windows 95/98 with 16 MB ram (32 MB ram recommended)
Windows NT4 SP3 or later with 32 MB ram (64 MB ram recommended)
Windows 2000 with 64 MB ram
SEL-5030
SEL-311L Instruction Manual
SEL ™
ERATOR
®
interface.
SEL
AC
SEL
AC ERATOR
. A Quick Tour
ERATOR
K-1