Table of Contents
Advertisement
3
ASSEMBLY
In order to make the assembly of the equipment easier, we recommend that you do not initially
fully tighten the screws. However, you should make sure that all screws are firmly tightened
after assembly.
3.1
Assembly instructions
Step 1:
1. Attach the main frame (1) to the horseshoe base (3) and front base (2) with four square neck bolts
(14) and two bolts (17), eight washers (21) and six lock nuts (23).
2. Insert the foam tube (6) into main frame (1).
3. Attach the foam (10) to the foam tube (6) with two foam plugs (12).
9
Advertisement
Table of Contents
