Download Print this page

Grantech SYS8F361VGGA Series Technical Manual

Intel haswell/broadwell series cpu based 3.5'' sbc

Advertisement

Quick Links

Technical Manual
Of
Intel Haswell/Broadwell Series CPU
Based
3.5'' SBC
SYS8F361VGGA
Revision: 2.0
Release date: June 23, 2015
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Advertisement

loading
Need help?

Need help?

Do you have a question about the SYS8F361VGGA Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Grantech SYS8F361VGGA Series

  • Page 1 Technical Manual Intel Haswell/Broadwell Series CPU Based 3.5’’ SBC SYS8F361VGGA Revision: 2.0 Release date: June 23, 2015 Trademark: * Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
  • Page 2 Environmental Protection Announcement Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.
  • Page 3: Table Of Contents

    TABLE OF CONTENT ENVIRONMENTAL SAFETY INSTRUCTION................... iv USER’S NOTICE............................ v MANUAL REVISION INFORMATION....................v ITEM CHECKLIST..........................v CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD FEATURE OF MOTHERBOARD..................1 SPECIFICATION........................2 LAYOUT DIAGRAM.......................4 CHAPTER 2 HARDWARE INSTALLATION JUMPER SETTING........................ 11 CONNECTORS AND HEADERS..................16 2-2-1 CONNECTORS......................16 2-2-2...
  • Page 4: Chapter 1 Introduction Of The Motherboard Feature Of Motherboard

    Chapter 1 Introduction of the Motherboard Feature of Motherboard n Onboard Intel ® Haswell/Broadwell series SoC Processor, with low power consumption never denies high performance n Support 2 * DDR3L 1333/1600 MHz SO-DIMM, up to 16GB n Support 1 * SATAIII device n Onboard 1* full-size mSATA/ Mini-PCIE slot n Onboard 1* half-size Mini-PCIE slot n Onboard 2 * RJ-45 gigabit Ethernet LAN port...
  • Page 5: Specification

    Specification Spec Description 3.5”SBC; PCB size: 14.8x 10.2 cm Design ® Intel Haswell/Boardwell ULT SoC CPU Embedded CPU *CPU model varies from different IPC options. Please consult your dealer for more information of onboard CPU. 2 * DDRIIIL SODIMM Slot for un-buffered DDRIIIL 1333/1600 MHz SDRAM, expandable to 16GB Memory Slot Dual-channel function supported...
  • Page 6: Layout Diagram

    1* SATAIII 6Gb/s port 1* SATA Power connector 1* CPU FAN connector 1* Front panel audio header 1* SPK_OUT header (for 3W / 8 OHM amplifier) 4* Serial port header (COM1 supports RS422/RS485 function) 1* 9-pin USB 2.0 header (Expansible to 2* USB 2.0 ports) 1* 4-pin USB 2.0 header (Expansible to 1* USB 2.0 ports) 1* GPIO header 1* SMBUS header...
  • Page 7 Rear IO Panel Diagram For Power connector 2 Series Series: USB 3.0 Ports LAN1 HDMI1 Port USB 2.0 Ports RJ-45 LAN Port *9V~24V DC Power-in Connector LAN2 HDMI2 Port RJ-45 LAN Port Line-Out Port/ Optical SPDIF Out Port *Notice: Please connect compatible power supply to the power connector. The voltage of power connector should not be lower than 9V or higher than 24V, otherwise it may do harm to the board &...
  • Page 8 For Power Connector 1 Series: Serial Port Header SATA Power (COM4/3/2/1) Connector SPK_OUT INVERTER Header SATAIII Port Line-Out Port/ Reset Button Optical SPDIF-Out Port Power Switch Button USB 2.0 Headers HDMI Ports GPIO Header Front Panel Front Panel Header Audio Header MMPE : Full-size Mini-PCIE/mSATA Slot...
  • Page 9 Internal Diagram-Front Side: For Power connector 2 Series: SATA Power Serial Port Header Connector (COM4/3/2/1) INVERTER SPK_OUT Header SATAIII Port Line-Out Port/ Reset Button Optical SPDIF-Out Port Power Switch Button USB 2.0 Headers HDMI Ports GPIO Header Front Panel Front Panel Header Audio Header MMPE : Full-size...
  • Page 10 Internal Diagram-Back Side: *Intel CPU Note: CPU is the most important part of the board and very fragile to any possible harm. Make sure that there is no damage to the CPU during any installation procedures!
  • Page 11 Jumper Position: JBAT COPEN AT-MODE...
  • Page 12 Jumper Jumper Name Description LVDS PVCC 5V/3.3V /12V Select 4-Pin Block INVERTER VCC 5V/12V Select 3-Pin Block COM4 Header Pin9 Function Select 4-Pin Block COM3 Header Pin9 Function Select 4-Pin Block COM2 Header Pin9 Function Select 4-Pin Block COM1 Header Pin9 Function Select 4-Pin Block JBAT CMOS RAM Clear Function Setting...
  • Page 13 Headers Header Name Description FP_AUDIO Front Panel Audio Header 9-pin Block SPK_CON Speaker Header 4-pin Block COM4/3/2/1 Serial Port Header X4 9-pin Block USB4 USB 2.0 Header 9-pin Block USB6 USB 2.0 Header 4-pin Block Front Panel Header(PWR LED/ 8-pin Block HDD LED/Power Button /Reset) GPIO GPIO Header...
  • Page 14: Chapter 2 Hardware Installation

    Chapter 2 Hardware Installation 2-1 Jumper Setting JP3 (4-pin): LVDS PVCC 3.3V/5V/12V Function Select JP3→LVDS 2 4 6 2 4 6 1 3 5 1 3 5 2-4 Closed: LVDS 3-4 Closed: LVDS 4-6 Closed: VCC= 3.3V; VCC= 5V; LVDS VCC= 12V. JP2 (3-pin): INVERTER VCC 5V/12V Select JP2→INVERTER 1-2 Closed: Inverter VCC= 5V;...
  • Page 15 JP7 (4-pin): COM4 Header Pin9 Function Select JP7→COM4 2 4 6 2 4 6 1 3 5 1 3 5 2-4 Closed: 3-4 Closed: 4-6 Closed: RI=RS232; RI= 5V; RI= 12V. JP5 (4-pin): COM3 Header Pin9 Function Select JP5→COM3 2 4 6 2 4 6 1 3 5 1 3 5...
  • Page 16 JP6 (4-pin): COM2 Header Pin9 Function Select JP6→COM2 2 4 6 2 4 6 1 3 5 1 3 5 2-4 Closed: 3-4 Closed: 4-6 Closed: RI=RS232; RI= 5V; RI= 12V. JP4 (4-pin): COM1 Header Pin9 Function Select JP4→COM1 2 4 6 2 4 6 1 3 5 1 3 5...
  • Page 17 JBAT (2-pin): Clear CMOS JBAT 1-2 Open: Normal; 1-2 Closed:Clear CMOS CMOS Clear Setting COPEN (2-pin): Case Open Message Display Function Select COPEN Case open function Pin 1-2 Closed: When Case open function pin short to GND, the Case open function was detected.
  • Page 18 AT_MODE (2-pin): AT Mode Function Select Pin 1-2 closed: AT_MODE function is enabled. In this case your computer will automatically turns on after a sudden power failure when power supply resumes. AT-MODE 1-2 Open: Normal; 1-2 Closed: AT Mode Selected. JP1 (2-pin): Security Measure Function Select 1-2 Open:Enable Security Measures in the Flash Descriptor(Default);...
  • Page 19: Connectors And Headers

    Connectors and Headers 2-2-1 Connectors (1) Rear I/O Connectors USB 3.0 Ports HDMI1 Port LAN1 USB 2.0 Ports RJ-45 LAN Port *9V~24V DC Power-in Connector (*Optional) LAN2 HDMI2 Port Line-Out Port/ RJ-45 LAN Port Optical SPDIF Out Port Icon Name Function For user to connect compatible power adapter to provide power supply for the...
  • Page 20 Line-Out Connector For user to connect external speaker, /Optical SPDIF-Out earphones, etc to transfer system audio Connector output. This connector can function as optical SPDIF-Out jack with compatible cables & devices. (2) DCIN1(2-pin) : 9V~24V DC- in Internal Power Connector Pin1 Pin No.
  • Page 21 (3) SATA1(7-pin): SATAIII Port connector SATA1 port is a high-speed SATAIII port that supports 6GB/s transfer rate. Pin No. Definition (4) PWROUT(4-pin): SATA Hard Disk Power-out Connector Pin 1 Warning: Make sure that Pin-1 of compatible SATA Power connector is inserted into corresponding Pin-1 of PWOUT to avoid possible damage to the board and hard disk driver! (5) CPUFAN (4-pin): CPUFAN Connector...
  • Page 22: Headers

    Pin 1 +12V Fan Power Fan Speed Control 2-2-2 Headers (1) FP_AUDIO (9-pin): Line-Out, MIC-In Header This header connects to Front Panel Line-out, MIC-In connector with cable. Pin 1 MIC-L MIC-R Lineout-R Lineout-L Line-Out, MIC Header...
  • Page 23 (2) SPK_OUT (4-pin): Speaker Header Pin1 (3)COM4/3/2/1(9-Pin): Serial Port Headers...
  • Page 24 Pin NO. RS232 *RS422 *RS485 (for COM1) (for COM1) DATA- Pin 1 DATA+ Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 6 7 8 9 Pin 9 3 4 5 Pin 1 *Notice: RS422, RS485 function is supported by COM1 header only, with compatible COM cable for RS422 or RS 485 function.
  • Page 25 Pin 1 (5) USB6 (4-pin): USB 2.0 Port Header +DATA -DATA Pin 1 (6) FP (8-pin): Front Panel Header...
  • Page 26 PWRBTN RSTSW PWRLED - HDDLED- HDDLED+ PWRLED+ Pin 1 (7) GPIO (10-pin): GPIO Header Pin 1 (8) SMBUS (5-Pin): SM BUS Header...
  • Page 27 VCC3.3 SMBUS_ALERT- SMBUS_DATA Pin 1 SMBUS_CLK (9) PS2KBMS (6-pin): PS/2 Keyboard & Mouse Header MS_DATA MS_CLK KB_CLK KB_DATA Pin 1...
  • Page 28 (10)JP8 (4-pin): LAN1 &LAN2 Activity LED Headers Pin1 (11) INVERTER (8-pin): LVDS Inverter Connector Pin No. Definition Backlight Enable Backlight PWM PVCC PVCC Backlight Up SW Pin 1 Backlight Down SW Warning! Find Pin-1 location of the inverter and make sure that the installation direction is correct! Otherwise serious harm will occur to the board/display panel!!
  • Page 29 (12) LVDS (30-pin): 24-bit Dual Channel LVDS Header P in 2 P in 1 Pin NO. Pin Define Pin NO. Pin Define Pin 1 LVDSB_DATAN3 Pin 2 LVDSB_DATAP3 Pin 3 LVDS_CLKBN Pin 4 LVDS_CLKBP Pin 5 LVDSB_DATAN2 Pin 6 LVDSB_DATAP2 Pin 7 LVDSB_DATAN1 Pin 8...