Motor Connection - Danfoss VLT 2800 Series General Information Manual

to mains supplies with up to 400 V be-
tween phase and ground.
See Technical data for correct dimensioning of cable
cross-section.

Motor connection

Connect the motor to terminals 96, 97, 98. Connect
ground to terminal 99.
No. 96 97 98 Motor voltage 0-100% of line
voltage.
U V W 3 wires of motor
U1 V1 W1 6 wires out of motor, Delta-con-
W2 U2 V2 nected
U1 V1 W1 6 wires out of motor, Star-con-
nected
U2, V2, W2 to be interconnec-
ted separately (optional termi-
nal block)
No. PE Ground connection
See Technical data for correct dimensioning of cable
cross-section.
18
®
VLT 2800 Series
®
MG.27.A2.22 - VLT is a registered Danfoss trademark